IEEE 1893-2015 PDF

IEEE 1893-2015 PDF

IEEE Guide for the Measurement of DC Transmission Line and Earth Electrode Line Parameters

$35.50 $71.00 -50%
isbn 9780738198897
Product Code: IEEE 1893
Stock In Stock
Published: 02/25/2016
Number of Pages: 34
File Size: 1 file, 2.7 MB

Available Options

Product Description

IEEE Guide for the Measurement of DC Transmission Line and Earth Electrode Line Parameters

Introduction: This introduction is not part of IEEE Std 1893™-2015, IEEE Guide for the Measurement of DC Transmission Line and Earth Electrode Line Parameters. As an effective means for long-distance and large-capacity power transmission, high-voltage direct current (HVDC) has been employed worldwide. In addition to regular tests, such as polarity verification and insulation resistance testing, the line parameters need to be measured after the dc transmission line and the earth electrode line have been installed or reconstructed. The main purpose of measuring is to provide actual data for system short-circuit calculations, relay protection-setting calculations, communication interference calculations, operating scheme selection, etc. Therefore, a working group was formed to develop a standard that would provide guidance for measurement of dc transmission line and earth electrode line parameters.

Contents:

  • 1.1 Scope
  • 1.2 Purpose
  • 3.1 Definitions
  • 3.2 Acronyms and abbreviations
  • 4.1 Contents of regular test
  • 4.2 Contents of transmission line parameter measurement
  • 4.3 General considerations on measurement
  • 4.4 Test safety precautions
  • 4.5 Measuring instrument requirements
  • 5.1 General
  • 5.2 Induced-voltage testing
  • 5.3 Induced-current testing
  • 6.1 Polarity verification with battery
  • 6.2 Polarity verification and insulation resistance test using a megohm meter
  • 8.1 General considerations of impedance frequency characteristic measurement
  • 8.2 Measurement under the bipolar measuring mode
  • 8.3 Measurement under the bipolar parallel measuring mode
  • 8.4 Measurement of the coupling parameters of a single-circuit transmission line
  • 8.5 Measurement of the coupling parameters of a double-circuit transmission line
  • 9.1 General
  • 9.2 Measurement of dc resistance
  • 9.3 Measurement of the impedance frequency characteristic

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE 1893-2015 PDF

IEEE 1893-2015 PDF

$35.50 $71.00