IEEE Standard for Jitter and Phase Noise
Introduction: This introduction is not part of IEEE Std 2414-2020, IEEE Standard for Jitter and Phase Noise. Jitter is one of the most important specifications when measuring the performance of several types of electronic components and/or systems. That figure of merit has, in fact, a relevant impact on the design, operation, and verification of many of today products and services. At the component/systemic level, jitter measurements can lead to malfunction causes and to effectively diminish their deleterious effect on the overall system performance. This standard defines the terms, definitions, and mathematical models used to specify and characterize jitter. It is intended for the following: Individuals and organizations who specify electronic devices, equipment, and systems subject to jitter to be purchased Individuals and organizations who purchase electronic devices, equipment, and systems subject to jitter to be applied in their products Individuals and organizations whose responsibility is to characterize and write reports on jitter for specific applications Suppliers interested in providing high-quality and high-performance electronic components devices, equipment, and systems to acquirers This standard is designed to help organizations and individuals incorporate quality considerations during the definition, evaluation, selection, and acceptance of supplier of electronic devices for operational use in their equipment. This standard is intended to satisfy the following objectives: P
Contents:
- 1.1 Scope
- 1.2 Purpose
- 2.1 Definitions
- 2.2 Acronyms and abbreviations
- 2.3 Symbols
- 3.1 General concepts
- 3.2 Timing jitter
- 3.3 Period jitter
- 3.4 Cycle-to-cycle jitter
- 3.5 Random jitter
- 3.6 Deterministic jitter
- 3.7 Total jitter
- 3.8 RMS and peak-to-peak jitter
- 3.9 Bit-error rate (BER)
- 3.10 Phase noise