IEEE 400.4-2015 PDF

IEEE 400.4-2015 PDF

IEEE Guide for Field Testing of Shielded Power Cable Systems Rated 5 kV and Above with Damped Alternating Current (DAC) Voltage

$44.00 $88.00 -50%
isbn 9781504406413
Product Code: IEEE 400.4
Stock In Stock
Published: 01/29/2016
Number of Pages: 62
File Size: 1 file, 5.1 MB

Available Options

Product Description

IEEE Guide for Field Testing of Shielded Power Cable Systems Rated 5 kV and Above with Damped Alternating Current (DAC) Voltage

Introduction: This introduction is not part of IEEE Std 400.4™-2015, IEEE Guide for Field Testing of Shielded Power Cable Systems Rated 5 kV and Above with Damped Alternating Current (DAC) Voltage. This guide provides an overview of an available method for performing electrical tests in the field on shielded power cable systems using damped alternating current (DAC) voltages. It is intended to help the reader select a test that is appropriate for a specific situation of interest. It provides a brief description of the use of DAC voltage sources to perform field tests with a short discussion of specific tests. The material presented is descriptive and tutorial. Based on the current state of the art using this testing method, the guide addresses the evaluation of test results, the specification of test voltage levels and time of application. If applicable, additional details are provided in the omnibus standard, IEEE Std 400™1, IEEE Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems Rated 5 kV and Above, or in “point” documents, such as IEEE 400.1™, IEEE Guide for Field Testing of Laminated Dielectric, Shielded Power Cable Systems Rated 5 kV and Above with High Direct Current Voltage; IEEE 400.2™, IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF); and IEEE 400.3™, IEEE Guide for Partial Discharge Testing of Shielded Power Cable Systems in a Field Environment. 1 Information on references can be found in Clause 2.

Contents:

  • 1.1 Background
  • 1.2 Scope
  • 1.3 Purpose
  • 3.1 Definitions
  • 3.2 Acronyms and abbreviations
  • 5.1 General
  • 5.2 Types of DAC testing
  • 6.1 Overview
  • 6.2 DAC test voltage circuit
  • 6.3 DAC parameters
  • 7.1 General
  • 7.2 DAC test parameters and procedures
  • 7.3 DAC evaluation criteria
  • 8.1 General
  • 8.2 PD characteristics
  • 8.3 PD Evaluation criteria
  • 9.1 General
  • 9.2 DF Parameters
  • 9.3 DF Evaluation Criteria

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE 400.4-2015 PDF

IEEE 400.4-2015 PDF

$44.00 $88.00