IEEE 446-1995 PDF

IEEE 446-1995 PDF

IEEE Recommended Practice for Emergency and Standby Power Systems for Industrial and Commercial Applications (Color Book® Series)

$99.00 $198.00 -50%
isbn 1559375981
Product Code: IEEE 446
Stock In Stock
Published: 07/03/1996
Number of Pages: 320
File Size: 1 file, 3.1 MB

Available Options

Product Description

IEEE Recommended Practice for Emergency and Standby Power Systems for Industrial and Commercial Applications (Color Book® Series)

Introduction: (This introduction is not a part of IEEE Std 446-1995, IEEE Recommended Practice for Emergency and Standby Power Systems for Industrial and Commercial Applications.) In 1968 the Industrial and Commercial Power Systems Committee within the Industry and General Applications Group of the Institute of Electrical and Electronics Engineers recog- nized that a need existed for a publication that would provide guidance to industrial users and suppliers of emergency and standby power systems. The nature of electric power failures, interruptions, and their duration covers a range in time from microseconds to days. Voltage excursions occur within a range from 20 times normal (or more) to a complete absence of voltage. Frequency excursions can vary as widely in many forms, from harmonics to direct current. These variables occur due to a multitude of condi- tions both in the power system ahead of the user’s service entrance and following the service entrance within the user’s area of distribution. Such elements as lightning, automobiles striking power poles, ice storms, tornadoes, switch- ing to alternate lines, and equipment failure are but a few of the causes of interruptions in the electric power supply ahead of the service entrance. Within the user’s area of distribution are such elements as short and open circuits, undersized feeders, equipment failures, operator errors, temporary overloads, single-phasing unbalanced feeders, fire, switching, and many other causes of power interruptio

Scope: This standard presents recommended engineering principles, practices, and guidelines for the selection, design, installation, application, operation, and maintenance of emergency and standby power systems. This information is primarily presented from a user’s viewpoint; however, managing the effects of power system disturbances requires close cooperation between users, electric utilities, and equipment manufacturers. This standard addresses the following questions: Is an emergency or standby power system (or both) needed, and what will it accom- plish? What types of systems are available, and which can best meet the users’ needs? How should the most suitable system be designed and applied to the existing power system? What are the maintenance and operating requirements for maintaining system reli- ability? Where can additional information be obtained? What are the design considerations for maintaining system reliability? Definitions to specialized technical terms used throughout this standard are provided in Chapter 2. Emergency and standby power requirements of both industrial and commercial users are outlined and discussed, including a distinction made between mandatory laws, reg- ulations, codes, and standards applicable to each. Knowledge of these requirements enables electric utility companies to meet specific power supply needs and equipment manufacturers to design efficient, practical, and reliable equipment and systems. Recommendations are made for various types of installations, based on technical and economic information on available hardware and systems provided by equipment manufacturers. Technical guidelines for protecting and grounding emergency and standby power systems are presented in Chapter 6 and Chapter 7, respectively. Guidelines for the maintenance of specific types of equipment are presented in Chapter 8. Chapter 9 provides information on applica- tions of emergency and standby power for specific industries. Chapter 10 presents design and operation guidelines that will improve emergency and standby power system reliability. The following industries and fields are considered specialized and beyond the scope of inclu- sion and direct address by th

Contents:

  • Scope
  • Introduction
  • Introduction
  • Introduction

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE 446-1995 PDF

IEEE 446-1995 PDF

$99.00 $198.00