IEEE 487.3-2014 PDF

IEEE 487.3-2014 PDF

IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of Hybrid Facilities

$59.50 $119.00 -50%
isbn 9780738191553
Product Code: IEEE 487.3
Stock In Stock
Published: 08/18/2014
Number of Pages: 54
File Size: 1 file, 3.7 MB

Available Options

Product Description

IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of Hybrid Facilities

Introduction: This introduction is not part of IEEE Std 487.3-2014, IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of Hybrid Facilities. Wire-line telecommunication facilities serving electric supply locations often require special high-voltage protection (HVP) against the effects of fault-produced ground potential rise (GPR) or induced voltages, or both. Some of the telecommunication services are used for control and protective relaying purposes and may be called on to perform critical operations at times of power system faults. Even when critical services are not involved, special HVP may be required for both personnel safety and plant protection at times of power system faults. Effective protection of any wire-line telecommunication circuit requires coordinated protection on all circuits provided over the same telecommunication cable. Some electrical environments, collectively called electric supply locations, require the application of unique electrical protection techniques because of their special nature. One such environment is the electric power station or substation. Another is at or near power line transmission and distribution structures such as towers or poles. Such structures often provide a convenient site for the location of wireless, personal communications service, and cellular antennas and their associated electronic equipment that is served by a link to the wired telecommunications network. This s

Contents:

  • 1.1 Scope
  • 1.2 Purpose
  • 3.1 Definitions
  • 3.2 Abbreviations and acronyms
  • 4.1 Electric power stations
  • 4.2 Wireless service sites
  • 4.3 Service via metallic wire-line facilities
  • 4.4 Service via optical fiber facilities
  • 4.5 Service via microwave systems
  • 4.6 Responsibilities
  • 5.1 Topologies for hybrid optical fiber isolation systems
  • 6.1 Voltage protection levels
  • 6.2 Locations at or near high-voltage towers or poles
  • 6.3 Electrical protection considerations for telecommunications outside plant serving high-voltage
  • 6.4 Electrical protection measures
  • 6.5 Typical grounding
  • 7.1 GPR-related protection considerations
  • 7.2 Induction-related protection considerations
  • 7.3 Benefits of all-dielectric cables
  • 8.1 CFJ at electric power stations
  • 8.2 CFJ located outside the ZOI of an electric supply location
  • 8.3 CFJ located within the ZOI of an electric supply location
  • 8.4 Conditional deployment of CFJ with electronics or pair protection that requires grounding
  • 8.5 Conditional deployment of CFJ with electronics or pair protection that does not require
  • 9.1 Typical ac power service to wireless locations at power line towers or poles
  • 9.2 Distribution transformers
  • 9.3 Electrostatic coupling
  • 9.4 Engine generating units
  • 10.1 Wire-line–fiber cable junction (CFJ)

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE 487.3-2014 PDF

IEEE 487.3-2014 PDF

$59.50 $119.00