IEEE 551-2006 PDF

IEEE 551-2006 PDF

IEEE Recommended Practice for Calculating AC Short-Circuit Currents in Industrial and Commercial Power Systems (Color Book® Series)

$89.00 $178.00 -50%
isbn 0738149322
Product Code: IEEE 551
Stock In Stock
Published: 11/17/2006
Number of Pages: 308
File Size: 1 file, 5.5 MB

Available Options

Product Description

IEEE Recommended Practice for Calculating AC Short-Circuit Currents in Industrial and Commercial Power Systems (Color Book® Series)

Introduction: This recommended practice is intended as a practical, general treatise for engineers on the subject of ac short-circuit currents in electrical power systems. The focus of this standard is the understanding and application of analytical techniques of short-circuit analysis in industrial and commercial power systems. However, the same engineering principles apply to all electrical power systems, including utilities and systems other than 60 Hz. More than any other book in the IEEE Color Book® series, the “Violet Book” covers the basics of short-circuit currents. To help the reader, the same one-line diagram that is used in several of the other color books is used in sample calculations. Items covered in the Violet Book that are not covered in the other color book chapters on short-circuit currents are the contributions of regenerative SCR drives and capacitors to faults. The reference data chapter in this recommended practice is quite extensive and should be very useful for any type of power system analysis. Notice to users Errata Errata, if any, for this and all other standards can be accessed at the following URL: http:/ /standards.ieee.org/reading/ieee/updates/errata/index.html. Users are encouraged to check this URL for errata periodically. Interpretations Current interpretations can be accessed at the following URL: http://standards.ieee.org/ reading/ieee/interp/index.html. Patents Attention is called to the possibility that implementation of this standard may require use

Contents:

  • Introduction
  • 1.1 Scope
  • 1.2 Definitions
  • 1.3 Acronyms and abbreviations
  • 1.4 Bibliography
  • 1.5 Manufacturers’ data sources
  • 2.1 Introduction
  • 2.2 Available short-circuit
  • 2.3 Symmetrical and asymmetrical currents
  • 2.4 Short-circuit calculations
  • 2.5 Total short-circuit current
  • 2.6 Why short-circuit currents are asymmetrical
  • 2.7 DC component of short-circuit currents
  • 2.8 Significance of current asymmetry
  • 2.9 The application of current asymmetry information
  • 2.10 Maximum peak current
  • 2.11 Types of faults
  • 2.12 Arc resistance
  • 2.13 Bibliography
  • Introduction
  • 3.10 Determination of X/R ratios for ANSI fault calculations
  • 3.11 Three winding transformers
  • 3.12 Duplex reactor
  • 3.13 Significant cable lengths
  • 3.14 Equivalent circuits
  • 3.15 Zero sequence line representation
  • 3.16 Equipment data required for short-circuit calculations
  • 3.17 Bibliography

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE 551-2006 PDF

IEEE 551-2006 PDF

$89.00 $178.00