IEEE 638-2013 PDF

IEEE 638-2013 PDF

IEEE Standard for Qualification of Class 1E Transformers for Nuclear Power Generating Stations

$30.00 $60.00 -50%
isbn 9781504416085
Product Code: IEEE 638
Stock In Stock
Published: 03/11/2014
Number of Pages: 21
File Size: 1 file, 440 KB

Available Options

Product Description

IEEE Standard for Qualification of Class 1E Transformers for Nuclear Power Generating Stations

Introduction: This introduction is not part of IEEE Std 638™-2013, IEEE Standard for Qualification of Class 1E Transformers for Nuclear Power Generating Stations. This latest revision to the IEEE Std 638 is a revision of IEEE Std 638-1992 and is the result of a review of IEEE Std 638-1992 and present practices in Class 1E transformer qualification. This revision incorporates current practices and lessons learned from the implementation of previous versions of this standard by the industry. IEEE Std 638™ was developed to provide specific methods and test procedures for the qualification of Class 1E transformers in accordance with IEEE Std 323™, which provides guidance for demonstrating and documenting the qualification of electrical equipment used in all Class 1E and interface systems. This latest revision has clarified or updated a number of items, including removing references to old IEEE standards that are no longer in use today, incorporating the information from the 7 April 1999 Correction to IEEE 638-1992 into the body of the document, and updating certain aspects of the document to be more in line with the latest versions of the related transformer standards referenced in this document. Additionally, the modern technique of frequency response analysis (FRA) was incorporated into the qualification tests to be performed as part of this standard. Performing the FRA tests before and after the short-circuit test and seismic test will provide better insight into the actual condition of the

Contents:

  • 1.1 Scope
  • 1.2 Purpose
  • 4.1 Minimum information
  • 4.2 Service conditions
  • 4.3 Equipment performance requirements
  • 4.4 Seismic requirements
  • 4.5 Electrical, mechanical, and structural interfaces
  • 4.6 Industry codes and standards
  • 4.7 Impedance
  • 4.8 Nonsinusoidal load currents
  • 4.9 Shipping, storage, and handling requirements
  • 4.10 Margin
  • 5.1 Acceptable approaches
  • 5.2 Testing
  • 5.3 Thermal life qualification
  • 5.4 Thermal analysis calculation
  • 5.5 Operating experience
  • 5.6 Qualification by analysis and test
  • 6.1 General
  • 6.2 Test unit
  • 6.3 Qualification tests
  • 6.4 Seismic qualification procedure
  • 6.5 Pass-fail criteria
  • 7.1 Design qualification
  • 7.2 Seismic qualification
  • 7.3 Maintenance

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE 638-2013 PDF

IEEE 638-2013 PDF

$30.00 $60.00