IEEE 691-2001 PDF

IEEE 691-2001 PDF

IEEE Guide for Transmission Structure Foundation Design and Testing

$68.00 $136.00 -50%
isbn 9780738118086
Product Code: IEEE 691
Stock In Stock
Published: 12/26/2001
Number of Pages: 48
File Size: 1 file, 26 MB

Available Options

Product Description

IEEE Guide for Transmission Structure Foundation Design and Testing

Introduction: (This introduction is not part of IEEE Std 691-2001, IEEE Guide for Transmission Structure Foundation Design and Testing.) This design guide is intended for the use of the practicing professional engineer engaged in the design of foundations for electrical transmission line structures. This guide is not to be used as a substitute for profes- sional engineering competency, nor is it to be considered as a rigid set of rules. Of all building materials, soil is the least uniform and most unpredictable; therefore, the methods described in this guide may not be the only methods of design and analysis, nor may they be appropriate in all situations. Design and analysis must be based upon sound engineering principles and relevant experience. This design guide is the result of a major effort to consolidate the results of published reports and data, ongo- ing research, and experience into a single document. It is also an outgrowth of the previously published efforts of a joint committee of the American Society of Civil Engineers and the Institute of Electrical and Electronic Engineers, which combined the knowledge, expertise, and experience of both organizations in the field of transmission line structure foundation design. Electrical transmission line structures are unique when compared with other structures, primarily in that no human occupancy is involved and the loading requirements are different from other structure types. The primary loading of most conventional structures or buil

Contents:

  • 1.1 Scope
  • 1.2 System design considerations
  • 1.3 Other considerations
  • 2.1 Loading
  • 2.2 Foundation performance criteria and structure types
  • 3.1 General
  • 3.2 Phases of investigation
  • 3.3 Types of boring samples
  • 3.4 Soil and rock classification
  • 3.5 Engineering properties
  • 4.1 Structural applications
  • 4.2 Analysis
  • 4.3 Traditional design methods
  • 4.4 Construction considerations
  • 4.5 General foundation considerations
  • 5.1 Types of foundations
  • 5.2 Structural applications
  • 5.3 Drilled concrete shaft foundations
  • 5.4 Direct embedment foundations
  • 5.5 Precast-prestressed, hollow concrete shafts and steel casings
  • 5.6 Design and construction considerations
  • 6.1 Pile types and orientation
  • 6.2 Pile stresses
  • 6.3 Pile capacity
  • 6.4 Pile deterioration
  • 6.5 Construction considerations
  • 7.1 Anchor types
  • 7.2 Anchor application
  • 7.3 Design analysis
  • 7.4 Group effect

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE 691-2001 PDF

IEEE 691-2001 PDF

$68.00 $136.00