IEEE 789-2013 PDF

IEEE 789-2013 PDF

IEEE Standard Performance Requirements for Communications and Control Cables for Application in High-Voltage Environments

$43.50 $87.00 -50%
isbn 9780738184869
Product Code: IEEE 789
Stock In Stock
Published: 08/13/2013
Number of Pages: 48
File Size: 1 file, 620 KB

Available Options

Product Description

IEEE Standard Performance Requirements for Communications and Control Cables for Application in High-Voltage Environments

Introduction: This introduction is not part of IEEE Std 789-2013, IEEE Standard Performance Requirements for Communications and Control Cables for Application in High-Voltage Environments. Wire-line communications and control cables either entering electric supply locations or passing through their zone of influence (ZOI) are subjected to extraneous voltages that include the longitudinally induced voltage as well as the Ground Potential Rise (GPR) voltage. Environmental hazards at electric supply locations include, among others, electrical interference and electromagnetic radiation. See CIGRE TB-124 [B4]a. In these high-voltage environments, the insulation withstand capability of ordinary outside type telephone cables may be insufficient to provide full effective electrical protection. For more background information on these subjects the reader should refer to IEEE Std 487, particularly the Clause which deals with these dedicated cables. The problems of less than adequate dielectric withstand become more acute when critical non-interruptible channels are involved and if GPR levels exceed 300 V. This standard defines the performance requirements for communications and control cables suitable for these classes of service. IEEE Std 789-1988 was reaffirmed in 1994 however it was withdrawn as a standard in 1999. Although the Standard has been withdrawn from active status it is still available for purchase. At the present time there are three IEEE Standards that deal with Cabling Design, two de

Contents:

  • 1.1 Scope
  • 1.2 Purpose
  • 1.3 General
  • 3.1 Acronyms and abbreviations
  • 4.1 Electric supply location environment
  • 5.1 General
  • 5.2 Basic requirements
  • 5.3 Ethernet cable requirements
  • 5.4 Typical cable jacket requirements within an electric supply location
  • 5.5 Information to be supplied by user
  • 5.6 Ambient environmental conditions
  • 6.1 General
  • 6.2 Temperature
  • 6.3 Humidity
  • 6.4 Mechanical shock
  • 6.5 Altitude
  • 6.6 Ultraviolet
  • 6.7 Chemical environment
  • 6.8 Fungus
  • 6.9 Insects or rodents
  • 6.10 Lightning
  • 7.1 Electrical environment conditions
  • 8.1 General types of cable plant
  • 8.2 Interference mitigations
  • 9.1 General
  • 9.2 Conductors
  • 9.3 Insulation of conductors
  • 9.4 Color scheme of conductors
  • 9.5 Forming of pairs
  • 9.6 Assembly

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE 789-2013 PDF

IEEE 789-2013 PDF

$43.50 $87.00