IEEE Standard for Petroleum and Chemical Industry--Premium-Efficiency, Severe-Duty, Totally Enclosed Squirrel Cage Induction Motors from 0.75 kW to 370 kW (1 hp to 500 hp)
Introduction: This introduction is not part of IEEE Std 841-2021, IEEE Standard for Petroleum and Chemical Industry—Premium- Efficiency, Severe-Duty, Totally Enclosed Squirrel Cage Induction Motors from 0.75 kW to 370 kW (1 hp to 500 hp). This standard applies to premium-efficiency, severe-duty, totally enclosed fan-cooled (TEFC) and totally enclosed non-ventilated (TENV), horizontal and vertical, single-speed, squirrel cage polyphase induction motors, 0.75 kW to 370 kW (1 hp to 500 hp), and up to 4000 V nominal, in National Electrical Manufacturers Association (NEMA) frame sizes 143T and larger, for petroleum, chemical, and other severe-duty applications (commonly referred to as premium-efficiency severe-duty motors). Excluded from the scope of this standard are motors with sleeve bearings and additional specific features required for explosion-proof motors.
Contents:
- 1.1 Scope��������������������������������������������������������������������������������������������������������������������������������������������������12
- 1.2 Purpose�����������������������������������������������������������������������������������������������������������������������������������������������12
- 1.3 Word usage�����������������������������������������������������������������������������������������������������������������������������������������12
- 3.1 Definitions������������������������������������������������������������������������������������������������������������������������������������������14
- 3.2 Acronyms and abbreviations��������������������������������������������������������������������������������������������������������������14
- 4.1 Usual service conditions���������������������������������������������������������������������������������������������������������������������14
- 4.2 Unusual service conditions�����������������������������������������������������������������������������������������������������������������15
- 5.1 Basis of rating�������������������������������������������������������������������������������������������������������������������������������������15
- 5.2 Frame assignments�����������������������������������������������������������������������������������������������������������������������������16
- 5.3 Voltage and frequency ratings�������������������������������������������������������������������������������������������������������������16
- 5.4 Synchronous speed ratings�����������������������������������������������������������������������������������������������������������������16
- 5.5 Enclosures������������������������������������������������������������������������������������������������������������������������������������������16
- 6.1 General�����������������������������������������������������������������������������������������������������������������������������������������������16
- 6.2 Motor designs and starting characteristics������������������������������������������������������������������������������������������16
- 6.3 Power supply variations���������������������������������������������������������������������������������������������������������������������16
- 6.4 Insulation system and temperature rise�����������������������������������������������������������������������������������������������17
- 7.1 Bearings and lubrication���������������������������������������������������������������������������������������������������������������������18
- 7.2 Rotor and shaft�����������������������������������������������������������������������������������������������������������������������������������19
- 7.3 Frames, endshields, and fan covers�����������������������������������������������������������������������������������������������������20
- 7.4 Fans����������������������������������������������������������������������������������������������������������������������������������������������������20
- 7.5 Main terminal boxes and terminal leads���������������������������������������������������������������������������������������������20
- 7.6 Drains�������������������������������������������������������������������������������������������������������������������������������������������������21
- 7.7 Hardware��������������������������������������������������������������������������������������������������������������������������������������������22
- 7.8 Airborne sound�����������������������������������������������������������������������������������������������������������������������������������22
- 7.9 Vibration���������������������������������������������������������������������������������������������������������������������������������������������22
- 8.1 Frame paint�����������������������������������������������������������������������������������������������������������������������������������������23
- 8.2 Assembly��������������������������������������������������������������������������������������������������������������������������������������������23
- 8.3 Exposed internal stator, rotor, and shaft surfaces��������������������������������������������������������������������������������23
- 8.4 Miscellaneous�������������������������������������������������������������������������������������������������������������������������������������23
- 10.1 Test methods�������������������������������������������������������������������������������������������������������������������������������������24