IEEE C135.80-2012 PDF

IEEE C135.80-2012 PDF

IEEE Standard for Fasteners for Overhead Line Construction

$45.00 $90.00 -50%
isbn 9780738175942
Product Code: IEEE C135.80
Stock In Stock
Published: 11/26/2012
Number of Pages: 42
File Size: 1 file, 750 KB

Available Options

Product Description

IEEE Standard for Fasteners for Overhead Line Construction

Introduction: This introduction is not part of IEEE Std C135.80-2012, IEEE Standard for Fasteners for Overhead Line Construction. This standard combines the following standards for fasteners for overhead line construction: IEEE Std C135.1™, IEEE Standard for Zinc-Coated Steel Bolts and Nuts for Overhead Line Construction. a, b IEEE Std C135.3™, IEEE Standard for Zinc-Coated Ferrous Lag Screws for Overhead Line Construction. ANSI C135.4, American National Standard for Zinc-Coated Ferrous Eyebolts and Nuts for Overhead Line Construction.c ANSI C135.5, American National Standard for Zinc-Coated Ferrous Eyenuts and Eyelets for Overhead Line Construction. ANSI/NEMA C135.10, ANSI/NEMA Standard for Galvanized Ferrous Washers.d ANSI C135.14, American National Standard for Staples with Rolled or Slash Points for Overhead Line Construction. ANSI C135.38, American National Standard for Zinc-Coated Ferrous Washerhead Bolts and Washer Nuts. a IEEE publications are available from The Institute of Electrical and Electronics Engineers (http://standards.ieee.org/). b The IEEE standards or products referred to in this clause are trademarks of The Institute of Electrical and Electronics Engineers, Inc. c ANSI publications are available from the American National Standards Institute (http://www.ansi.org/). d NEMA publications are available from Global Engineering Documents (http://global.ihs.com/).

Contents:

  • 1.1 Scope
  • 1.2 Purpose
  • 3.1 Material
  • 3.2 Dimensions
  • 3.3 Threads
  • 3.4 Strength
  • 3.5 Sizes
  • 3.6 Corrosion protection
  • 3.7 Finish
  • 3.8 Marking of fasteners
  • 4.1 Lag screws
  • 4.2 Dimensions
  • 4.3 Strength
  • 5.1 Material
  • 5.2 Eyebolts
  • 5.3 Eye nuts and eyelets
  • 6.1 Material
  • 6.2 Dimensions
  • 8.1 Material
  • 8.2 Dimensions
  • 9.1 Material
  • 9.2 Dimensions
  • 9.3 Strength and rigidity
  • 9.4 Protective coatings

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE C135.80-2012 PDF

IEEE C135.80-2012 PDF

$45.00 $90.00