IEEE C37.100.1-2018 PDF

IEEE C37.100.1-2018 PDF

IEEE Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V

$74.50 $149.00 -50%
isbn 9781504454476
Product Code: IEEE C37.100.1
Stock In Stock
Published: 02/08/2019
Number of Pages: 99
File Size: 1 file, 2.7 MB

Available Options

Product Description

IEEE Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V

Introduction: This introduction is not part of IEEE Std C37.100.1-2018, IEEE Standard for Common Requirements for High-Voltage Power Switchgear Rated Above 1000 V. This document, with the exception of formatting and reference updates, is exactly the same as IEEE C37.100.1-2007 having made no technical changes. There was a revised document that was heavily harmonized with IEC; however, copyright permission was ultimately not obtained. In order to comply with the copyright complaint and in light of the impending expiration of the active document, IEEE Std C37.100.1-2007, the decision was made to revert back to the 2007 version of the document and only update the formatting. This standard was written specifically to collect into one document the requirements that are common in many IEEE power switchgear standards. It follows the concept already in place in IEC 62271-1 [B23]. In some cases, the requirements are equivalent to those in several existing switchgear standards; in other cases, they represent a compromise among two or more standards that have minor (or moderate) differences in the requirement. Still other requirements are taken from IEC 62271-1 [B23]. One distinct exception is the treatment of altitude correction factors or air density correction factors. This standard introduces a departure from the historical approach for altitude correction factors as they apply to applications above 1000 m. Refer to 3.3.2 and Annex B for these details. The expected benefits of this common require

Contents:

  • 1.1 Scope
  • 1.2 Purpose
  • 3.1 General
  • 3.2 Normal (usual) service conditions
  • 3.3 Special (unusual) service conditions for both indoor and outdoor switchgear
  • 5.1 General
  • 5.2 Rated maximum voltage (V) or (Ur)
  • 5.3 Rated insulation level, Ud, Us, Up
  • 5.4 Rated power frequency (fr)
  • 5.5 Rated continuous (normal) current and temperature rise
  • 5.6 Rated short-time withstand current (Ik)
  • 5.7 Rated peak withstand current (Ip)
  • 5.8 Rated duration of short-circuit (tk)
  • 5.9 Rated supply voltage of closing and opening devices and of auxiliary and control circuits (Ua)
  • 5.10 Rated supply frequency of closing and opening devices and of auxiliary circuits
  • 5.11 Rated pressure of compressed gas supply for insulation and/or operation
  • 5.12 Rated filling levels for insulation and/or operation
  • 6.1 Requirements for liquids in switchgear
  • 6.2 Requirements for gases in switchgear
  • 6.3 Grounding of switchgear
  • 6.4 Auxiliary and control equipment
  • 6.5 Dependent power operation
  • 6.6 Stored energy operation
  • 6.7 Independent manual operation
  • 6.8 Operation of releases
  • 6.9 Low- and high-pressure interlocking and monitoring devices
  • 6.10 Nameplates
  • 6.11 Interlocking devices
  • 6.12 Position indication
  • 6.13 Degrees of protection by enclosures

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE C37.100.1-2018 PDF

IEEE C37.100.1-2018 PDF

$74.50 $149.00