IEEE Guide for Common Format for Naming Intelligent Electronic Devices (COMDEV)
Introduction: This introduction is not part of IEEE Std C37.248™-2017, IEEE Guide for Common Format for Naming Intelligent Electronic Devices (COMDEV). While configuring an IED, the user has to compose and enter a number of electronic names or designations that uniquely identify the IED and each channel within it. The same is also required when manually composing COMTRADE files for use in simulation and modeling applications. Current standards such as IEEE Std C37.111™, IEEE Std C37.118™, IEEE Std C37.232™, and IEC 61850 require such designations but define them as “unformatted fields,” which means it is up to the user to compose and specify these fields without having the benefit of a standard, recommended practice, or guide. Such fields may include, and are not limited to, company, substation and IED names, installed locations, channel names, phase identifiers, monitored circuits, voltage classes, and so forth. The above-mentioned fields are essential for fault and disturbance analysis and are especially so for automated applications. For example, without knowing the voltage class it is difficult to determine whether the data are calibrated based on peak or based on rms. Also, without accurate and informative names, it is impossible for an automated application to associate voltage and current phases together to calculate a fault location or a missing phase. Users and utilities are often faced with the problem of having to invent their own naming conventions and they do so usually to sui
Contents:
- 1.1 Scope��������������������������������������������������������������������������������������������������������������������������������������������������11
- 1.2 Purpose�����������������������������������������������������������������������������������������������������������������������������������������������11
- 1.3 Need for guide������������������������������������������������������������������������������������������������������������������������������������11
- 3.1 Definitions������������������������������������������������������������������������������������������������������������������������������������������12
- 3.2 Acronyms and abbreviations��������������������������������������������������������������������������������������������������������������12
- 4.1 Examples of IED naming practices�����������������������������������������������������������������������������������������������������13
- 4.2 Examples of channel naming practices�����������������������������������������������������������������������������������������������13
- 6.1 General�����������������������������������������������������������������������������������������������������������������������������������������������14
- 6.2 Variability of format with applications�����������������������������������������������������������������������������������������������14
- 6.3 Delimiter��������������������������������������������������������������������������������������������������������������������������������������������14
- 6.4 Defined fields��������������������������������������������������������������������������������������������������������������������������������������14
- 6.5 Optional fields������������������������������������������������������������������������������������������������������������������������������������15
- 6.6 Limitations�����������������������������������������������������������������������������������������������������������������������������������������15
- 6.7 Examples��������������������������������������������������������������������������������������������������������������������������������������������16
- 7.1 Use in COMTRADE and COMNAME����������������������������������������������������������������������������������������������16
- 7.2 Use in settings files�����������������������������������������������������������������������������������������������������������������������������17
- 7.3 Use in CIM�����������������������������������������������������������������������������������������������������������������������������������������17
- 7.4 Use in IEC 61850��������������������������������������������������������������������������������������������������������������������������������19
- 7.5 Use in channel names in DR���������������������������������������������������������������������������������������������������������������20
- 7.6 Use in DNP3 (IEEE 1815)������������������������������������������������������������������������������������������������������������������21
- 8.1 Line relay��������������������������������������������������������������������������������������������������������������������������������������������21
- 8.2 Transformer relay�������������������������������������������������������������������������������������������������������������������������������21
- 8.3 Bus relay���������������������������������������������������������������������������������������������������������������������������������������������22
- 8.4 Second bus relay���������������������������������������������������������������������������������������������������������������������������������22
- 8.5 Generator relay�����������������������������������������������������������������������������������������������������������������������������������22
- 8.6 Line recloser���������������������������������������������������������������������������������������������������������������������������������������22
- 8.7 Second line recloser����������������������������������������������������������������������������������������������������������������������������22
- 8.8 DFR����������������������������������������������������������������������������������������������������������������������������������������������������22
- 8.9 Substation gateway�����������������������������������������������������������������������������������������������������������������������������22