IEEE Guide and Tutorial for the Application of High-Voltage (> 1000 V) Fuses and Accessories
Introduction: This introduction is not part of IEEE Std C37.48™-2020, IEEE Guide and Tutorial for the Application of High-Voltage (> 1000 V) Fuses and Accessories. This guide was prepared by the Revision of Fuse Standards Working Group of the IEEE Subcommittee on High- Voltage Fuses, and replaces IEEE Std C37.48-2005 and IEEE Std C37.48.1™-2011. Most of the structure and material in this guide is based on IEC TR 62655:2013, reprinted with permission from IEC. The IEC technical report, in turn, contains significant portions excerpted and reprinted with permission from IEEE Std C37.48.1- 2011, IEEE Guide for the Application, Operation, and Coordination of High-Voltage (> 1000 V) Current- Limiting Fuses. IEC TR 62655:2013 frequently compares and contrasts IEC and IEEE practices, but with the primary emphasis on IEC practice. While this guide also compares and contrasts practices, because it is an IEEE guide it primarily emphasizes IEEE practice (e.g., using IEEE terminology in the body of the document, but with Table 1 showing a comparison between IEEE and IEC terms). As with the IEC technical report, it is felt that including both sets of practices will particularly benefit users located in areas where both practices are used, and where fuses primarily tested to one or the other, or both, standards are available. Acknowledgments The author thanks the International Electrotechnical Commission (IEC) for permission to reproduce Information from its International Standards. All such extracts are
Contents:
- 1.1 Scope��������������������������������������������������������������������������������������������������������������������������������������������������13
- 1.2 Purpose�����������������������������������������������������������������������������������������������������������������������������������������������13
- 1.3 How to use this guide��������������������������������������������������������������������������������������������������������������������������13
- 3.1 Definitions������������������������������������������������������������������������������������������������������������������������������������������16
- 3.2 Acronyms and abbreviations��������������������������������������������������������������������������������������������������������������16
- 4.1 A simple introduction to fuses�������������������������������������������������������������������������������������������������������������17
- 4.2 Current-limiting fuses������������������������������������������������������������������������������������������������������������������������27
- 4.3 Expulsion fuses����������������������������������������������������������������������������������������������������������������������������������39
- 4.4 Other related protective devices���������������������������������������������������������������������������������������������������������47
- 4.5 Fuse supports��������������������������������������������������������������������������������������������������������������������������������������50
- 5.1 General application section����������������������������������������������������������������������������������������������������������������51
- 5.2 Typical applications����������������������������������������������������������������������������������������������������������������������������76
- 5.3 Installation, operation, maintenance, and replacement considerations���������������������������������������������119
- 5.4 Recycling�����������������������������������������������������������������������������������������������������������������������������������������127