IEEE C57.13-2016 PDF

IEEE C57.13-2016 PDF

IEEE Standard Requirements for Instrument Transformers

$56.00 $112.00 -50%
isbn 9781504421331
Product Code: IEEE C57.13
Stock In Stock
Published: 06/29/2016
Number of Pages: 96
File Size: 1 file, 3.3 MB

Available Options

Product Description

IEEE Standard Requirements for Instrument Transformers

Introduction: This introduction is not part of IEEE Std C57.13™-2016, IEEE Standard Requirements for Instrument Transformers. This standard was prepared by the Instrument Transformer Subcommittee of the Transformers Committee of the IEEE Power and Energy Society. The purpose of this standard is to cover the electrical, dimensional, and mechanical characteristics and to take into consideration certain safety features, for current and inductively coupled voltage transformers. The changes in this revision of IEEE Std C57.13 include revised partial discharge requirements, the addition of Annex B, covering bushing current transformers and two classes of instrument transformer requirements have been introduced. In addition, this standard has been reorganized to make it more understandable. The accuracy requirements from IEEE Std C57.13.6™ have also been incorporated into the standard.1 1 Information on references can be found in Clause 2.

Contents:

  • 1.1 Scope
  • 1.2 Purpose
  • 4.1 Service conditions
  • 4.2 Effect of air density on flashover voltage
  • 4.3 Frequency
  • 4.4 Effect of altitude on temperature rise and effect of ambient temperature on permissible loading
  • 4.5 Basic impulse insulation levels, dielectric tests, and outdoor instrument transformer creepage
  • 4.6 Temperature rise
  • 4.7 Capacitance and dissipation factor requirements
  • 4.8 Classification of tests
  • 4.9 Construction
  • 5.1 Basis for accuracy classes
  • 5.2 Expression of transformer correction factor at 0.6 power factor (lagging) of metered load
  • 5.3 Standard accuracy classes
  • 5.4 Limiting values of ratio correction factor and phase angle for standard accuracy classes
  • 6.1 Terms in which ratings shall be expressed
  • 6.2 Standard burdens
  • 6.3 Accuracy ratings for metering
  • 6.4 Accuracy ratings for relaying
  • 6.5 Continuous thermal current rating factors based on 30 °C average ambient air temperature
  • 6.6 Short-time current ratings
  • 6.7 Secondary winding-induced voltages
  • 6.8 Nameplates
  • 6.9 Terminals
  • 6.10 Application data
  • 6.11 Routine accuracy tests
  • 7.1 Terms in which ratings shall be expressed
  • 7.2 Standard burdens
  • 7.3 Accuracy ratings
  • 7.4 Thermal burden ratings

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE C57.13-2016 PDF

IEEE C57.13-2016 PDF

$56.00 $112.00