IEEE C57.13.7-2018 PDF

IEEE C57.13.7-2018 PDF

IEEE Standard for Current Transformers with Maximum Milliampere Secondary Current of 250 mA

$31.00 $62.00 -50%
isbn 9781504454254
Product Code: IEEE C57.13.7
Stock In Stock
Published: 08/30/2019
Number of Pages: 17
File Size: 1 file, 2.3 MB

Available Options

Product Description

IEEE Standard for Current Transformers with Maximum Milliampere Secondary Current of 250 mA

Introduction: This introduction is not part of IEEE Std C57.13.7-2018, IEEE Standard for Current Transformers with Maximum Milliampere Secondary Current of 250 mA. This standard was prepared by the Working Group on Milliampere Current Transformers (CTs) of the Instrument Transformer Subcommittee of the Transformers Committee of the IEEE Power and Energy Society. The purpose of this standard is not only to allow the evaluation, certification, and specification of milliampere CTs similar to the present process available for 5-A secondary output CTs under IEEE Std C57.13™-2016, since 80-mA and 100-mA CTs are now approved in Canada, but also to take into consideration certain applications in the use of the milliampere CTs that has the advantage of a much lower voltage drop in the secondary leads when the burden is located at a farther distance from where the installed ma CT is located. Also, for the same voltage drop across the burden of a milliampere CT, its power dissipation in the burden is much less than that when using the 5-A CT. However, with a milliampere CT, care should be taken to minimize environmental interference due to the much lower secondary current as compared to that of the 5-A CT, since it would be more susceptible to noise/interference, etc.

Contents:

  • 1.1 Scope����������������������������������������������������������������������������������������������������������������������������������������������������9
  • 1.2 Purpose�������������������������������������������������������������������������������������������������������������������������������������������������9
  • 3.1 Definitions������������������������������������������������������������������������������������������������������������������������������������������10
  • 3.2 Acronyms and abbreviations��������������������������������������������������������������������������������������������������������������10
  • 6.1 Assignment of accuracy class�������������������������������������������������������������������������������������������������������������11
  • 6.2 Basis for measurement accuracy classes���������������������������������������������������������������������������������������������11
  • 6.3 Requirements for accuracy and accuracy of calibration systems��������������������������������������������������������13

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE C57.13.7-2018 PDF

IEEE C57.13.7-2018 PDF

$31.00 $62.00