IEEE Guide for Installation and Maintenance of Liquid-Immersed Power Transformers
Introduction: This introduction is not part of IEEE Std C57.93-2019, IEEE Guide for Installation and Maintenance of Liquid- Immersed Power Transformers. The significant changes in this new revision are the removal of the clauses pertaining to the transportation of transformers and the inclusion of other insulating liquids such as natural ester based liquids. Power transformers usually represent one of the most important and most costly single items in substations. Furthermore, particularly for large transformers, their failure usually results in lengthy outages or downgrading of service. For these reasons, a high degree of care is required to properly install and maintain them. Because of these considerations, IEEE and other standards-developing organizations have published, since at least the early 1920s, various recommendations for testing, installing, and maintaining transformers. This guide consolidates and replaces IEEE Std C57.12.11™-1980 and IEEE Std C57.12.12™-1980, which covered large transformers, and ASA C57.93-1958, which covered smaller units. The intention of this guide is to assist users and suppliers in the inspection, installation, commissioning, and routine maintenance of liquid-immersed power transformers to help ensure that the units are placed in service in acceptable condition to provide years of reliable service. This guide also provides information on developing a maintenance and monitoring program. This guide discusses the following two sizes of transformers: — 501
Contents:
- 4.1 General�����������������������������������������������������������������������������������������������������������������������������������������������12
- 4.2 Inspection and receipt�������������������������������������������������������������������������������������������������������������������������12
- 4.3 Assembly��������������������������������������������������������������������������������������������������������������������������������������������13
- 4.4 Energization���������������������������������������������������������������������������������������������������������������������������������������14
- 4.5 Maintenance���������������������������������������������������������������������������������������������������������������������������������������16
- 5.1 General�����������������������������������������������������������������������������������������������������������������������������������������������17
- 5.2 Shipping���������������������������������������������������������������������������������������������������������������������������������������������17
- 5.3 Internal inspection������������������������������������������������������������������������������������������������������������������������������18
- 5.4 Handling���������������������������������������������������������������������������������������������������������������������������������������������19
- 5.5 Anchorage������������������������������������������������������������������������������������������������������������������������������������������20
- 5.6 Assembly��������������������������������������������������������������������������������������������������������������������������������������������20
- 5.7 Insulation dryness and vacuum treatment�������������������������������������������������������������������������������������������22
- 5.8 Field drying of insulation��������������������������������������������������������������������������������������������������������������������29
- 5.9 Vacuum reprocessing��������������������������������������������������������������������������������������������������������������������������34
- 5.10 Tests after the transformer has been assembled and filled with insulating liquid������������������������������37
- 5.11 Energization�������������������������������������������������������������������������������������������������������������������������������������38
- 5.12 Maintenance�������������������������������������������������������������������������������������������������������������������������������������39
- 5.13 Storage guidelines����������������������������������������������������������������������������������������������������������������������������44