IEEE 1406-2020 PDF

IEEE 1406-2020 PDF

IEEE Guide for the Use of Gas-in-Fluid Analysis for Paper and Laminated Paper-Polypropylene Insulated Cable Systems

$45.00 $90.00 -50%
isbn 9781504463188
Product Code: IEEE 1406
Stock In Stock
Published: 05/22/2020
Number of Pages: 60
File Size: 1 file, 2.8 MB

Available Options

Product Description

IEEE Guide for the Use of Gas-in-Fluid Analysis for Paper and Laminated Paper-Polypropylene Insulated Cable Systems

Introduction: This introduction is not part of IEEE Std 1406-2020, IEEE Guide for the Use of Gas-in-Fluid Analysis for Paper and Laminated Paper-Polypropylene Insulated Cable Systems. This guide is intended for the engineering specialist interested in the evaluation and maintenance of fluid-filled cable systems. This includes high-pressure fluid-filled (HPFF) and high-pressure gas-filled (HPGF) pipe-type cables, as well as self-contained fluid-filled (SCFF) cables operating at low, medium, or high pressure. The pressurizing medium can be either a dielectric liquid or gas. The primary focus of this document is on testing of liquid-filled systems, with less emphasis on gas-filled systems, since HPGF cables constitute a significantly smaller amount of the total circuit miles of pipe-type cable systems. However, where applicable, the document will identify tests and analyses that can be used on gas-filled systems. The use of dissolved gas analysis (DGA) began in the 1970s and has become an important tool for those who are responsible for the reliable operation of these cable systems. The technique requires removing a small sample of the pressurizing fluid and analyzing the gases that are present in solution using a gas chromatograph. The results can provide clues as to the amount of thermo-electric aging that the cable system has experienced and how this aging may be progressing in time. DGA can also identify where there may be problems in the system, especially in the vicinity of cable access

Contents:

  • 1.1 Scope��������������������������������������������������������������������������������������������������������������������������������������������������10
  • 1.2 Purpose�����������������������������������������������������������������������������������������������������������������������������������������������10
  • 3.1 Definitions������������������������������������������������������������������������������������������������������������������������������������������11
  • 3.2 Acronyms and abbreviations��������������������������������������������������������������������������������������������������������������12
  • 5.1 The need for gas-in-fluid analysis�������������������������������������������������������������������������������������������������������13
  • 5.2 Historical use of DGA and interpretation in transformers�������������������������������������������������������������������14
  • 5.3 Historical application to HPFF and SCFF cable systems��������������������������������������������������������������������15
  • 5.4 Methodology and refinements for special cases���������������������������������������������������������������������������������16
  • 6.1 Mechanisms of gas generation������������������������������������������������������������������������������������������������������������17
  • 6.2 Rates of gas production for the various mechanisms��������������������������������������������������������������������������21
  • 6.3 Determination of gas solubility����������������������������������������������������������������������������������������������������������23
  • 6.4 Dissolved gas distribution in bulk fluid����������������������������������������������������������������������������������������������24
  • 7.1 Initial planning for a DGA program����������������������������������������������������������������������������������������������������26
  • 7.2 Number of samples and sampling locations���������������������������������������������������������������������������������������28
  • 7.3 Frequency of sample acquisition��������������������������������������������������������������������������������������������������������30
  • 7.4 On-site DGA measurements���������������������������������������������������������������������������������������������������������������30
  • 8.1 Sampling objectives���������������������������������������������������������������������������������������������������������������������������31
  • 8.2 Sampling equipment���������������������������������������������������������������������������������������������������������������������������31
  • 8.3 Sources of fluid sample contamination�����������������������������������������������������������������������������������������������32
  • 8.4 Sampling conditions���������������������������������������������������������������������������������������������������������������������������33
  • 8.5 Preparation for sampling��������������������������������������������������������������������������������������������������������������������34
  • 8.6 Sampling procedure����������������������������������������������������������������������������������������������������������������������������34
  • 8.7 Packaging and transport of samples����������������������������������������������������������������������������������������������������36
  • 9.1 Gas analysis of HPGF (high pressure gas-filled) cable systems, including gas moisture contents������37
  • 9.2 Sampling HPGF cables�����������������������������������������������������������������������������������������������������������������������37
  • 10.1 Gas analysis by chromatography using ASTM D3612���������������������������������������������������������������������41
  • 10.2 Gas analysis by other techniques������������������������������������������������������������������������������������������������������42
  • 10.3 Appearance and physical tests����������������������������������������������������������������������������������������������������������43
  • 10.4 Dielectric tests����������������������������������������������������������������������������������������������������������������������������������44
  • 10.5 Chemical tests����������������������������������������������������������������������������������������������������������������������������������45

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE 1406-2020 PDF

IEEE 1406-2020 PDF

$45.00 $90.00