IEEE 1434-2014 PDF

IEEE 1434-2014 PDF

IEEE Guide for the Measurement of Partial Discharges in AC Electric Machinery

$76.50 $153.00 -50%
isbn 9780738196855
Product Code: IEEE 1434
Stock In Stock
Published: 12/04/2014
Number of Pages: 81
File Size: 1 file, 4.9 MB

Available Options

Product Description

IEEE Guide for the Measurement of Partial Discharges in AC Electric Machinery

Introduction: This introduction is not part of IEEE Std 1434™-2014, IEEE Guide for the Measurement of Partial Discharges in AC Electric Machinery. Partial discharge (PD) measurements have been made on the windings of ac electric machinery for over 40 years. The electrical insulation of these windings may be prone to PD activity as a result of internal delaminations and of surface or slot discharge. These kinds of PD activity, when the machine is in normal operation, can result in significant deterioration over a period of time. Experience has indicated that PD measurements can be useful for assessing the condition of complete windings as well as of individual formwound coils and bars. This guide provides a review of the nature of PD in machine windings, how it can be measured under both off-line and on-line conditions, how it can be measured for individual form-wound coils or bars, and the significance and limitations of the measured values. IEC 60505 (2004-10)a defines the various factors that influence the performance of electrical insulation systems. These are the thermal, electrical, environmental, and mechanical stress factors. Stator winding insulation systems of ac electric machinery experience thermal, electrical, mechanical, and environmental stresses during operation. These stresses, individually or in combination, will age the insulation system and may lead to delamination of the groundwall insulation, abrasion of the outer semiconducting (Faraday) shield, loosening of the wedgi

Contents:

  • 1.1 Scope
  • 1.2 Purpose
  • 1.3 Limitations
  • 4.1 Sources of PD
  • 4.2 Forms of PD pulses
  • 4.3 Glow and pseudoglow discharges
  • 4.4 Peak amplitude variation of discharge pulses
  • 4.5 PD under short rise time and repetitive voltage impulses
  • 4.6 Magnetically induced vibration sparking
  • 4.7 Contact sparking
  • 5.1 Electrical pulse sensing
  • 5.2 RF radiation sensing
  • 5.3 Power-factor tip-up
  • 5.4 Energy/integrated charge transfer
  • 5.5 Ozone detection
  • 5.6 Acoustic and ultrasonic detection
  • 5.7 Black-out test
  • 5.8 Corona imaging instruments
  • 6.1 Coupling capacitors
  • 6.2 RF current transformers
  • 6.3 Near-field antennae
  • 6.4 UHF antennae
  • 7.1 Oscilloscopes
  • 7.2 Spectrum analyzers
  • 7.3 Integrating current detectors
  • 7.4 Quasi-peak pulse meters and RIV meters
  • 7.5 Pulse height analyzers
  • 7.6 Pulse phase analyzers
  • 7.7 Time-frequency classification map analyzers
  • 7.8 Synchronous three channel/multi-spectral system

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE 1434-2014 PDF

IEEE 1434-2014 PDF

$76.50 $153.00