IEEE Standard for the Functioning of Interfaces Among Propulsion, Friction Brake, and Train-Borne Master Control on Rail Rapid Transit Vehicles
Introduction: This introduction is not part of IEEE Std 1475-2012, IEEE Standard for the Functioning of Interfaces Among Propulsion, Friction Brake, and Train-Borne Master Control on Rail Rapid Transit Vehicles. This introduction provides background on the rationale used to develop this standard, which may aid in the understanding, usage, and applicability of this standard. Rail transit vehicles have been notable for their lack of standardization. Some real-life factors have contributed to this, primarily because of historic differences in the civil infrastructure and electrical power supply. This standard sets forth a framework for the interfaces among the propulsion system, friction brake system, and master control, but does not attempt to standardize the individual systems themselves and does not dictate that all vehicles must use the most advanced technology available. This standard applies to rail transit vehicles, which are usually, but not exclusively, electrically powered. These vehicles include railway electric multiple unit (EMU) cars, Heavy rail vehicles (HRVs) (subway or elevated cars), Light rail vehicles (LRVs) (streetcars), including units that combine powered and unpowered trucks or axles. All of these vehicles can be operated under the control of a driver or varying levels of complexity of train control computer, which are lumped together for this purpose as vehicle on- board (master) control (VOBC). In general, the type of train operation does not normally affect the prop
Contents:
- 1.1 Scope
- 1.2 Purpose
- 3.1 Definitions
- 3.2 Acronyms and abbreviations
- 4.1 Type I interfaces
- 4.2 Type II interfaces
- 4.3 Type III interfaces
- 5.1 Safety-critical interfaces
- 5.2 Emergency brake
- 5.3 Direction
- 5.4 Traction/brake mode selection
- 5.5 Modulation interfaces
- 5.6 Blending
- 5.7 Load weigh
- 5.8 Speed
- 5.9 Penalty brake
- 5.10 Spin/slide interfaces
- 5.11 No-motion detection
- 5.12 Alertness monitoring
- 5.13 Specialized brake functions
- 5.14 Specialized propulsion functions
- 5.15 Door status
- 5.16 Data and fault annunciation interfaces