IEEE 1628-2009 PDF

IEEE 1628-2009 PDF

IEEE Recommended Practice for Maintenance of DC Overhead Contact Systems for Transit Systems

$59.50 $119.00 -50%
isbn 9780738160009
Product Code: IEEE 1628
Stock In Stock
Published: 09/25/2009
Number of Pages: 58
File Size: 1 file, 610 KB

Available Options

Product Description

IEEE Recommended Practice for Maintenance of DC Overhead Contact Systems for Transit Systems

Introduction: This introduction is not part of IEEE Std 1628-2008, IEEE Recommended Practice for Maintenance of DC Overhead Contact Systems for Transit Systems. The vast majority of the presently operating electrified rail transit systems use overhead contact systems (OCS) or third rail to supply direct-current (dc) power to the rail vehicles. The OCS Sub-Committee for Rail Transit Systems was formed in 2001 with the purpose of developing standards and guidelines governing the design, construction, and maintenance of OCS for transit systems. One of the primary concerns of the committee, regarding OCS for light rail and electric trolleybus (ETB) systems, was the lack of uniform practices for the maintenance of the OCS, including but not limited to the structural supports, components and hardware, system parameters and operating procedures, and equipment. The purpose of this recommended practice is to provide a set of guidelines that can be used by the operators of new start-up systems to develop manuals, safety guidelines, practices, and procedures for effective maintenance of their OCS, or by the maintenance organizations of existing well-established systems to amplify or refine their existing practices. It is not intended that these recommended practices form the basis for a mandatory standard. Acceptance or rejection of any or all of the recommendations contained herein is left to the discretion of the individual agency, which should determine their applicability to its proposed or exist

Contents:

  • 1.1 Scope
  • 1.2 Purpose
  • 1.3 Application
  • 1.4 Other requirements
  • 3.1 Qualified person
  • 4.1 General
  • 4.2 Conductor tensioning
  • 4.3 Support method
  • 4.4 OCS styles
  • 4.5 OCS support and alignment
  • 5.1 OCS maintenance supervision
  • 5.2 Safety equipment
  • 5.3 Precautions
  • 5.4 Precautions with vehicles
  • 5.5 Precautions when working on or near public roads
  • 5.6 Precautions for working at heights
  • 5.7 Precautions with wires and ropes
  • 5.8 Working on electrified lines
  • 5.9 Switching procedures
  • 5.10 Working on energized lines
  • 5.11 Negative return connections and bonding
  • 6.1 First aid treatment for burns and scalds
  • 6.2 Transfer of personnel or passengers between rolling stock equipment on adjacent tracks
  • 6.3 Pole top rescue
  • 6.4 Resuscitation from electric shock
  • 6.5 Instructions for releasing victim from contact with a live conductor
  • 7.1 Ladders
  • 7.2 Road/rail vehicles
  • 7.3 Voltage detectors
  • 7.4 Hot sticks

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE 1628-2009 PDF

IEEE 1628-2009 PDF

$59.50 $119.00