IEEE 1732-2017 PDF

IEEE 1732-2017 PDF

IEEE Recommended Practice for Space Charge Measurements on High-Voltage Direct-Current Extruded Cables for Rated Voltages up to 550 kV

$35.50 $71.00 -50%
isbn 9781504439183
Product Code: IEEE 1732
Stock In Stock
Published: 06/26/2017
Number of Pages: 36
File Size: 1 file, 2.1 MB

Available Options

Product Description

IEEE Recommended Practice for Space Charge Measurements on High-Voltage Direct-Current Extruded Cables for Rated Voltages up to 550 kV

Introduction: This introduction is not part of IEEE Std 1732-2017, IEEE Recommended Practice for Space Charge Measurements on High-Voltage Direct-Current Extruded Cables for Rated Voltages up to 550 kV. Recently many high-voltage direct-current (HVDC) cable systems with extruded insulation have been installed all over the world (Mazzanti and Marzinotto [B13]). Since extruded insulation for HVDC cables is strongly affected by trapped space charge, several space charge measurement methods have been developed since the mid-1980s. So far, space charge measurements have mostly been made using thin, small-size plaques and mini-cables. Much less effort has been devoted to cables of size and design comparable or equal to the full- size cables installed in the field. On the other hand, space charge measurements on full-size cables are of great interest for practical cable systems, as such measurements enable actual service conditions of power cables to be evaluated. Inherent difficulties mainly related to thick insulation make measuring space charge on full-size cables difficult. However, since the 1990s, satisfactory space charge measurements on large HVDC extruded cables have been described in the literature. Furthermore, space charge measurements on full-size HVDC extruded cable loops have been, and are being, used worldwide in qualification tests for HVDC extruded cable link projects. These measurements are based on project-dependent agreements between cable manufacturers and the customers, as

Contents:

  • 1.1 Scope����������������������������������������������������������������������������������������������������������������������������������������������������9
  • 3.1 Definitions������������������������������������������������������������������������������������������������������������������������������������������10
  • 3.2 Acronyms and abbreviations��������������������������������������������������������������������������������������������������������������11
  • 5.1 Introduction����������������������������������������������������������������������������������������������������������������������������������������12
  • 5.2 Measurements by means of the PEA method��������������������������������������������������������������������������������������12
  • 5.3 Measurements by means of the TSM��������������������������������������������������������������������������������������������������18
  • 6.1 Measurements by means of the PEA method��������������������������������������������������������������������������������������22
  • 6.2 Measurements by means of the TSM��������������������������������������������������������������������������������������������������24

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE 1732-2017 PDF

IEEE 1732-2017 PDF

$35.50 $71.00