IEEE 1820-2020 PDF

IEEE 1820-2020 PDF

IEEE Guide on the Selection of Transmission and Distribution Insulators with Respect to Cold Weather Conditions

$48.50 $97.00 -50%
isbn 9781504472814
Product Code: IEEE 1820
Stock In Stock
Published: 03/19/2021
Number of Pages: 62
File Size: 1 file, 12 MB

Available Options

Product Description

IEEE Guide on the Selection of Transmission and Distribution Insulators with Respect to Cold Weather Conditions

Introduction: This introduction is not part of IEEE Std 1820-2020, IEEE Guide for on the Selection of Transmission and Distribution Insulators with Respect to Cold Weather Conditions. Service experience has revealed a weakness in outdoor insulation that is exposed to moderate levels of contamination with coincident icing leading to flashover under normal service voltage stress at the melting point. The problem is particularly severe for EHV insulators at or above 345 kV that have been selected on the basis of adequate switching surge control, leading to higher electric stress (voltage per meter of dry arc distance) compared to HV insulators. A joint DEIS/PES Task Force on Icing Tests for Insulators consolidated test methods into and distilled them into a series of standard ice, snow, and cold fog tests (IEEE P1783). To the extent possible, the standard icing tests are coordinated with existing practice in heavy rain and contamination testing in IEEE Std 4™.1 These electrical tests supplement the usual extreme-cold testing down to −45°C that affect material performance of insulators. Standard icing tests can only evaluate the electrical performance of insulators in a representative environment. Guidelines for selecting insulators, based on test results, are needed for selecting insulators in new installations, for insulator replacement programs, and for mitigation options where existing insulators must be upgraded. Parameters for insulator selection include insulator dry arcing and leakage

Contents:

  • 1.1 Scope��������������������������������������������������������������������������������������������������������������������������������������������������12
  • 1.2 Purpose�����������������������������������������������������������������������������������������������������������������������������������������������12
  • 1.3 Word usage�����������������������������������������������������������������������������������������������������������������������������������������12
  • 3.1 Definitions������������������������������������������������������������������������������������������������������������������������������������������13
  • 3.2 Acronyms and abbreviations��������������������������������������������������������������������������������������������������������������18
  • 4.1 Overall design goal�����������������������������������������������������������������������������������������������������������������������������19
  • 4.2 Statistical design processes�����������������������������������������������������������������������������������������������������������������20
  • 5.1 Overall design goal�����������������������������������������������������������������������������������������������������������������������������23
  • 5.2 Statistical model of ESDD������������������������������������������������������������������������������������������������������������������23
  • 5.3 Statistical model of NSDD�����������������������������������������������������������������������������������������������������������������24
  • 5.4 Models of electrical strength under polluted conditions���������������������������������������������������������������������25
  • 5.5 Joint distribution of ESDD and NSDD�����������������������������������������������������������������������������������������������27
  • 5.6 Special considerations for freezing conditions�����������������������������������������������������������������������������������28
  • 6.1 Overall design goal�����������������������������������������������������������������������������������������������������������������������������31
  • 6.2 Statistical distribution of freezing rain conductivity���������������������������������������������������������������������������31
  • 6.3 Statistical distribution of ice thickness�����������������������������������������������������������������������������������������������31
  • 6.4 Statistical distribution of surface pollution�����������������������������������������������������������������������������������������34
  • 6.5 Model of electrical strength under icing conditions����������������������������������������������������������������������������35
  • 6.6 Joint distribution of conductivity, thickness, and ESDD��������������������������������������������������������������������35
  • 7.1 Transmission line performance�����������������������������������������������������������������������������������������������������������36
  • 7.2 Distribution line performance�������������������������������������������������������������������������������������������������������������37
  • 7.3 Station insulator performance�������������������������������������������������������������������������������������������������������������37
  • 7.4 Live line tool performance������������������������������������������������������������������������������������������������������������������37
  • 8.1 Number of exposures��������������������������������������������������������������������������������������������������������������������������37
  • 8.2 Icing thickness������������������������������������������������������������������������������������������������������������������������������������38
  • 8.3 Rate of increase of ESDD and precipitation conductivity�������������������������������������������������������������������39
  • 8.4 Composite risk calculation�����������������������������������������������������������������������������������������������������������������39
  • 8.5 Component strength: mathematical model�����������������������������������������������������������������������������������������39
  • 8.6 Empirical model���������������������������������������������������������������������������������������������������������������������������������40
  • 8.7 Number of exposed insulators������������������������������������������������������������������������������������������������������������40

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE 1820-2020 PDF

IEEE 1820-2020 PDF

$48.50 $97.00