IEEE 1859-2017 PDF

IEEE 1859-2017 PDF

IEEE Standard for Relaxor-Based Single Crystals for Transducer and Actuator Applications

$30.00 $60.00 -50%
isbn 9781504442756
Product Code: IEEE 1859
Stock In Stock
Published: 12/22/2017
Number of Pages: 19
File Size: 1 file, 1.8 MB

Available Options

Product Description

IEEE Standard for Relaxor-Based Single Crystals for Transducer and Actuator Applications

Introduction: This introduction is not part of IEEE Std 1859-2017, IEEE Standard for Relaxor-Based Single Crystals for Transducer and Actuator Applications. In 2000, Yohachi (John) Yamashita recommended the development of a material standard for the relaxor-based piezoelectric single crystals (piezocrystals) of lead magnesium niobate–lead titanate solid solution (PMN-PT) and lead zinc niobate–lead titanate solid solution (PZN-PT) to support their maturation and use in medical and naval applications. As a result, a group of crystal growers, device designers, and materials researchers met; they concurred that a material standard should be developed for a set of piezocrystal compositions that have technological value. The standard was to identify a common set of material properties required by device designers and provide reliable values for these properties for each composition. Other information relevant to the use of piezocrystals that could facilitate discussions between device designers and crystal growers was to be included. Since then, biannual meetings have served to develop the scope and contents of the standard. In 2012, with the sponsorship of the IEEE Ultrasonics, Ferroelectrics, and Frequency Control Society (UFFC), the P1859 Relaxor-Based Single Crystals Working Group was established. The working group has developed a material standard that covers the physical and electromechanical properties required for relaxor-based piezoelectric single crystals of [001]-poled PMN-PT and PZN-

Contents:

  • 3.1 Defi nitions
  • 3.2 Acronyms and abbreviations
  • 4.1 Compositions
  • 4.2 Phase purity
  • 4.3 Crystal orientation
  • 4.4 Axes of reference
  • 4.5 Surface condition and electrodes
  • 4.6 Poling
  • 4.7 Poling direction
  • 4.8 Working electrode placement
  • 4.9 Direction of maximum strain for the [001] and [011] poling directions
  • 4.10 Test method details

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE 1859-2017 PDF

IEEE 1859-2017 PDF

$30.00 $60.00