IEEE Standard Protection Profile for Hardcopy Devices in IEEE Std 2600-2008 Operational Environment C
Introduction: This introduction is not part of IEEE Std 2600.3TM-2009, IEEE Standard Protection Profile for Hardcopy Devices in IEEE Std 2600™-2008 Operational Environment C. This document is a standard for a Common Criteria Protection Profile for Hardcopy Devices. It is intended to be used by manufacturers of Hardcopy Devices to write conformant Security Target documents for Common Criteria certification of their hardcopy device products. It may also be used to write conformant Protection Profiles for Hardcopy Devices. This standard is related to IEEE Std 2600TM-2008. IEEE Std 2600-2008 is a more general standard for hardcopy device security and contains a large amount of content that is beyond the scope of or otherwise inappropriate for a Common Criteria Protection Profile. The two standards are related by way of the compliance clause of IEEE Std 2600-2008. With some well-defined exceptions, 8.1.3 of IEEE Std 2600-2008 contains Security Objectives that are technically consistent with the Security Objectives (APE_OBJ) clause of this document. The exceptions to this consistency between IEEE Std 2600 and this standard are distinguished by the use of the word “should” instead of “shall” in IEEE Std 2600-2008 and the absence of those objectives in this standard. For more information Further information, including the status and updates of this standard, can be found on the Internet at http://grouper.ieee.org/groups/2600/. Comments or questions regarding this document should be directed to std
Scope: This standard is for a Protection Profile for Hardcopy Devices in a public-facing environment in which document security is not guaranteed, but access control and usage accounting are important to the operator of the environment. A retail copy center, public library, Internet café, and hotel business center are typical applications of this environment. This environment will be known as “Operational Environment C.” 1.2 Purpose The purpose of this standard is to create a security Protection Profile (PP) for Hardcopy Devices in Operational Environment C as defined in IEEE Std 2600TM-2008.1 1.3 Application notes Application notes are provided where they may contribute to the reader’s understanding. These notes, while not part of the formal statement of this Protection Profile, are included as an acknowledgment of the diverse uses of this document and are intended to provide guidance to its users. 1 Information on references can be found in Clause 2. Authorized licensed use limited to: Thomson Techstreet. Downloaded on March 10,2010 at 10:58:13 EST from IEEE Xplore. Restrictions apply.
Contents: