IEEE Recommended Practice for Conducting Short-Circuit Studies and Analysis of Industrial and Commercial Power Systems
Introduction: This introduction is not part of IEEE Std 3002.3-2018, IEEE Recommended Practice for Conducting Short-Circuit Studies and Analysis of Industrial and Commercial Power Systems. IEEE 3000 Standards Collection™ This recommended practice was developed by the Technical Books Coordinating Committee of the Industrial and Commercial Power Systems Department of the Industry Applications Society, as part of a project to repackage the popular IEEE Color Books®. The goal of this project is to speed up the revision process, eliminate duplicate material, and facilitate use of modern publishing and distribution technologies. When this project is completed, the technical material included in the 13 IEEE Color Books will be included in a series of new standards—the most significant of which will be a new standard, IEEE Std 3000™, IEEE Recommended Practice for the Engineering of Industrial and Commercial Power Systems. The new standard will cover the fundamentals of planning, design, analysis, construction, installation, startup, operation, and maintenance of electrical systems in industrial and commercial facilities. Approximately 60 additional dot standards, organized into the following categories, will provide in-depth treatment of many of the topics introduced by IEEE Std 3000™: Power Systems Design (3001 series) Power Systems Analysis (3002 series) Power Systems Grounding (3003 series) Protection and Coordination (3004 series) Emergency, Standby Power, and Energy Management Syste
Contents:
- 3.1 Definitions
- 3.2 Acronyms and abbreviations
- 4.1 Overview
- 4.2 Objectives for short-circuit analysis
- 4.3 Methodology and standards
- 5.1 Introduction
- 5.2 Available short-circuit current
- 5.3 Symmetrical and asymmetrical currents
- 5.4 Short-circuit calculations
- 5.5 Total short-circuit current
- 5.6 Why short-circuit currents are asymmetrical
- 5.7 DC component of short-circuit currents
- 5.8 Significance of current asymmetry
- 5.9 The application of current asymmetry information
- 5.10 Maximum peak current
- 5.11 Types of faults
- 5.12 Arc resistance
- 6.1 Introduction
- 6.2 Fundamental principles
- 6.3 Short-circuit calculation procedure
- 6.4 One-line diagram
- 6.5 Per-unit and ohmic manipulations
- 6.6 Network theorem and calculation techniques
- 6.7 Symmetrical components—modeling method for unbalanced faults calculation
- 6.8 Representing transformers with non-base voltages
- 6.9 Specific time period and variations on fault calculations
- 6.10 Determination of X/R ratios for fault calculations
- 7.1 Introduction
- 7.2 Power grid
- 7.3 Synchronous machines