IEEE 487.4-2013 PDF

IEEE 487.4-2013 PDF

IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of Neutralizing Transformers

$59.50 $119.00 -50%
isbn 9780738181936
Product Code: IEEE 487.4
Stock In Stock
Published: 03/15/2013
Number of Pages: 55
File Size: 1 file, 2.4 MB

Available Options

Product Description

IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of Neutralizing Transformers

Introduction: This introduction is not part of IEEE Std 487.4-2013, IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of Neutralizing Transformers. Wire-line communication facilities serving electric supply locations often require special high-voltage protection against the effects of fault-produced ground potential rise (GPR) or induced voltages, or both. Some of the telecommunication services are used for control and protective relaying purposes and may be called upon to perform critical operations at times of power system faults. Even when critical services are not involved, special high-voltage protection may be required for both personnel safety and plant protection at times of power system faults. Effective protection of any wire-line telecommunication circuit requires coordinated protection on all circuits provided over the same telecommunication cable. This standard presents workable methods for the electrical protection of wire-line communication circuits serving electric supply locations through the use of neutralizing transformers. This project is part of a reorganization of IEEE Std 487™ in which the main document is broken down into a family of related documents (i.e., dot-series) segregated on the basis of technology: 487.1 (Metallic wire-line) 487.2 (Optical fiber facilities) 487.3 (Hybrid facilities) 487.4 (Neutralizing transformers) 487.5 (Isolation transformers) Neutralizing transformers are considere

Contents:

  • 1.1 Background
  • 1.2 Scope
  • 1.3 Purpose
  • 3.1 Definitions, acronyms, and abbreviations
  • 3.2 Acronyms and abbreviations
  • 4.1 Three-winding neutralizing transformer
  • 4.2 Two-winding neutralizing reactor
  • 4.3 Remanent voltage
  • 4.4 Flux, remanent flux, and exciting current
  • 4.5 Saturation
  • 4.6 Recovery
  • 4.7 Worst-case considerations—volt-seconds and the applied voltage
  • 4.8 Polarization of the neutralizing transformer or reactor core
  • 4.9 Reduction of volt-time requirements from worst case
  • 4.10 Paralleling neutralizing transformers or reactors
  • 5.1 Protection configurations employing neutralizing transformers
  • 5.2 Protection configuration employing neutralizing in parallel with isolation on separate pairs
  • 5.3 Protection configuration employing neutralizing in tandem with isolation

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE 487.4-2013 PDF

IEEE 487.4-2013 PDF

$59.50 $119.00