IEEE Standard Criteria for Safety Systems for Nuclear Power Generating Stations
Introduction: This introduction is not part of IEEE Std 603-2018, IEEE Standard Criteria for Safety Systems for Nuclear Power Generating Stations. This standard establishes minimum functional design criteria for the power, instrumentation, and control portions of nuclear power generating station safety systems. These criteria are established to provide a means for promoting appropriate practices for design and evaluation of safety system performance and reliability. However, adhering to these criteria will not necessarily fully establish the adequacy of any safety system’s functional performance and reliability; nonetheless, omission of any of these criteria will, in most instances, be an indication of safety system inadequacy. Application The criteria established by this standard apply to those systems defined as safety systems and do not necessarily apply to all the structures, systems, and components required for comprehensive plant safety. Although the scope is limited to safety systems, many of the principles may have applicability to equipment provided for safe shutdown, accident monitoring display instrumentation, interlock features, or any other structures, systems, and components related to safety. To determine those systems subject to these criteria, an analysis of the overall plant response to postulated design basis events will be performed. Good engineering judgment should be exercised in this analysis so that the adequate margins exist in the design to protect the health and
Contents:
- 1.1 Scope
- 1.2 Illustration
- 1.3 Application
- 1.4 Word Usage
- 1.5 Conformance
- 5.1 Single-failure criterion
- 5.2 Completion of protective action
- 5.3 Quality
- 5.4 Equipment qualifi cation
- 5.5 System integrity
- 5.6 Independence
- 5.7 Capability for testing and calibration
- 5.8 Information displays
- 5.9 Control of access
- 5.10 Repair
- 5.11 Identifi cation
- 5.12 Auxiliary features
- 5.13 Multi-unit stations
- 5.14 Human factors considerations
- 5.15 Reliability
- 5.16 Common-cause failure
- 6.1 Automatic control
- 6.2 Manual Control
- 6.3 Interaction between the sense and command features and other systems
- 6.4 Derivation of system inputs
- 6.5 Capability for testing and calibration
- 6.6 Operating bypasses
- 6.7 Maintenance bypass
- 6.8 Setpoints
- 7.1 Automatic control