IEEE 692-2013 PDF

IEEE 692-2013 PDF

IEEE Standard for Criteria for Security Systems for Nuclear Power Generating Stations

$59.50 $119.00 -50%
isbn 9780738186054
Product Code: IEEE 692
Stock In Stock
Published: 09/30/2013
Number of Pages: 57
File Size: 1 file, 820 KB

Available Options

Product Description

IEEE Standard for Criteria for Security Systems for Nuclear Power Generating Stations

Introduction: This introduction is not part of IEEE Std 692-2013, IEEE Standard for Criteria for Security Systems for Nuclear Power Generating Stations. The physical protection and security of nuclear power generating stations concerns utilities, manufacturers, the general public, and those who are responsible for licensing and regulating nuclear power generating stations and other nuclear facilities. The International Atomic Energy Agency (IAEA) defines nuclear security as “the means and ways of preventing, detecting, and responding to sabotage, theft, and unauthorized access to or illegal transfer of nuclear material and other radioactive substances, as well as their associated facilities.”a “For reactor facilities, the malicious act may target either systems whose failure would cause core damage, leading to radiological consequences, or areas where nuclear fuel (fresh or spent) or radioactive material is kept or stored.” The requirements for the development of security systems criteria for nuclear power generating stations are emphasized by international organizations’ publications such as the Nuclear Security Series from the IAEA. In particular: a) IAEA Nuclear Security Series No. 13 Nuclear Security Recommendations on Physical Protection of Nuclear Material and Nuclear Facilities (INFCIRC/225/Revision 5) [B9]b provides “guidance to States and their competent authority on how to develop or enhance, implement and maintain a physical protection regime for nuclear material and nuclear fac

Contents:

  • 1.1 Scope
  • 1.2 Purpose
  • 4.1 Design basis
  • 4.2 List of security system attributes
  • 4.3 General performance requirements
  • 5.1 Design basis
  • 5.2 Types of perimeter intrusion alarm system sensors
  • 5.3 Site evaluation, system selection, and location
  • 5.4 Location
  • 5.5 Probability of detection
  • 5.6 Required alarm conditions
  • 5.7 Tamper protection
  • 6.1 Design basis
  • 6.2 Outdoor security lighting
  • 6.3 Primary portal security lighting
  • 6.4 Interior security lighting
  • 6.5 Establishing and maintaining required illumination levels.
  • 7.1 Design basis
  • 7.2 Performance requirements
  • 7.3 Minimum equipment standards
  • 7.4 Documentation
  • 8.1 Design basis
  • 8.2 Access control barriers
  • 8.3 Types of hardware
  • 9.1 Design basis
  • 9.2 Description
  • 9.3 Site evaluation
  • 9.4 Performance requirements
  • 9.5 Tamper protection
  • 10.1 Design basis

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE 692-2013 PDF

IEEE 692-2013 PDF

$59.50 $119.00