IEEE 80-2013 PDF

IEEE 80-2013 PDF

IEEE Guide for Safety in AC Substation Grounding

$111.50 $223.00 -50%
isbn 9780738188508
Product Code: IEEE 80
Stock In Stock
Published: 05/15/2015
Number of Pages: 226
File Size: 1 file, 14 MB

Available Options

Product Description

IEEE Guide for Safety in AC Substation Grounding

Introduction: This introduction is not part of IEEE Std 80™-2013, IEEE Guide for Safety in AC Substation Grounding. This fifth edition represents the third major revision of this guide since its first issue in 1961. Previous editions extended the equations for calculating touch and step voltages to include L-shaped and T-shaped grids; they introduced curves to help determine current division, changed the criteria for selection of conductors and connections, and provided more information on resistivity measurement interpretation; and added the discussion of multilayer soils. This edition introduces the calculations to determine TCAP for materials not listed in Table 1. This information can be used to calculate TCAP for different combinations of bi-metallic electrodes used in grounding systems. This edition also introduces benchmarks. The benchmarks have two purposes. First, the benchmarks compare the equations in IEEE Std 80 to commercially available ground grid design software. The benchmarks show where IEEE Std 80 equations work well and their limitations. Second, the benchmarks provide software users a way to verify their understanding of the software. The fifth edition continues to build on over 50 years of work by dedicated members of working groups: AIEE Working Group 56.1 and IEEE Working Groups 69.1, 78.1, and D7. As required by IEEE Std 80-2013/Cor 1-2015, corrections were made to Clause 11, Clause 17, Annex C, Annex H as well as to Table 1 and Table 2; two equations following Figur

Contents:

  • 1.1 Scope
  • 1.2 Purpose
  • 4.1 Basic problem
  • 4.2 Conditions of danger
  • 5.1 Effect of frequency
  • 5.2 Effect of magnitude and duration
  • 5.3 Importance of high-speed fault clearing
  • 6.1 Duration formula
  • 6.2 Alternative assumptions
  • 6.3 Comparison of Dalziel’s equations and Biegelmeier’s curve
  • 6.4 Note on reclosing
  • 7.1 Resistance of the human body
  • 7.2 Current paths through the body
  • 7.3 Accidental circuit equivalents
  • 7.4 Effect of a thin layer of surface material
  • 8.1 Criteria of tolerable voltage definitions
  • 8.2 Typical shock situations for air-insulated substations
  • 8.3 Typical shock situations for gas-insulated substations
  • 8.4 Step and touch voltage criteria
  • 8.5 Effect of sustained ground currents
  • 9.1 Definitions
  • 9.2 General concept
  • 9.3 Primary and auxiliary ground electrodes
  • 9.4 Basic aspects of grid design
  • 9.5 Design in difficult conditions
  • 9.6 Connections to grid
  • 10.1 Special considerations for GIS definitions
  • 10.2 GIS characteristics
  • 10.3 Enclosures and circulating currents
  • 10.4 Grounding of enclosures

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE 80-2013 PDF

IEEE 80-2013 PDF

$111.50 $223.00