IEEE 952-2020 PDF

IEEE 952-2020 PDF

IEEE Standard for Specifying and Testing Single-Axis Interferometric Fiber Optic Gyros

$57.00 $114.00 -50%
isbn 9781504469791
Product Code: IEEE 952
Stock In Stock
Published: 02/12/2021
Number of Pages: 89
File Size: 1 file, 2 MB

Available Options

Product Description

IEEE Standard for Specifying and Testing Single-Axis Interferometric Fiber Optic Gyros

Introduction: This introduction is not part of IEEE Std 952-2020, IEEE Standard for Specifying and Testing Single-Axis Interferometric Fiber Optic Gyros. This standard was prepared by the Gyro and Accelerometer Panel of the IEEE Aerospace and Electronic Systems Society. Clause 4 through Clause 8 are used to develop a single-axis interferometric fiber optic gyro (IFOG) specification. The user is cautioned not to over-specify; only those parameters that are required for proper instrument performance in the specific application should be controlled. Parameters in addition to those given in this standard are not precluded. However, the specification should contain only those requirements that can be verified. Clause 9 through Clause 12 are used to develop procedures for testing a single-axis IFOG. These procedures, including test conditions to be considered, are derived from those currently in use. For a specific application, the test procedure should reflect the requirements of the specifications; therefore, not all tests outlined in this standard need to be included, nor are additional tests precluded. In some cases, alternative methods for measuring performance characteristics have been included or indicated. The intent is for the specification writer to extract the applicable test conditions and equipment requirements from Clause 11 for inclusion in the appropriate subclauses listed under 6.5. Similarly, it is intended that the writer extracts the applicable test procedures from Clause 12

Contents:

  • 1.1 Scope
  • 1.2 Purpose
  • 1.3 Word usage
  • 3.1 Specification scope
  • 3.2 Specification purpose
  • 3.3 Definitions
  • 4.1 Specifications
  • 4.2 Standards
  • 4.3 Drawings
  • 4.4 Bulletins
  • 4.5 Other publications
  • 5.1 Description
  • 5.2 General requirements
  • 5.3 Performance
  • 5.4 Mechanical requirements
  • 5.5 Electrical requirements
  • 5.6 Environmental requirements
  • 5.7 Reliability
  • 6.1 Classification of tests
  • 6.2 Acceptance tests
  • 6.3 Qualification tests
  • 6.4 Reliability tests
  • 6.5 Test conditions and equipment
  • 6.6 Test methods
  • 8.1 Intended use
  • 8.2 Ordering data
  • 8.3 Model equation
  • 11.1 Standard test conditions
  • 11.2 Standard operating and test equipment
  • 12.1 Examination of product—mechanical

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE 952-2020 PDF

IEEE 952-2020 PDF

$57.00 $114.00