IEEE Guide to Installation of Foundations for Transmission Line Structures
Introduction: This introduction is not part of IEEE Std 977-2010, IEEE Guide to Installation of Foundations for Transmission Line Structures. This guide is one of several documents, covering all aspects of overhead transmission line construction, that are being prepared by the Working Group on Construction of Overhead Lines of the Towers, Poles, and Conductors Subcommittee of the Transmission and Distribution Committee of the IEEE Power & Energy Society. This guide presents, in one document, the considerations necessary for the installation of foundations for transmission line structures. This guide is intended to be used as a reference source for parties involved in the ownership, design, and construction of transmission lines. Notice to users Laws and regulations Users of these documents should consult all applicable laws and regulations. Compliance with the provisions of this standard does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights This document is copyrighted by the IEEE. It is made available for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self- regulation, standardization, and the pr
Contents:
- 1.1 Scope
- 1.2 Purpose
- 1.3 Application
- 1.4 Legal disclaimer
- 2.1 Introduction
- 2.2 Structure functions and types
- 2.3 Loading
- 2.4 Foundation types and functions
- 2.5 Geotechnical factors in construction
- 2.6 Construction influences on foundation performance
- 2.7 Applicable codes and standards
- 3.1 Introduction
- 3.2 Types of spread foundations
- 3.3 Site plan outline
- 3.4 Excavation
- 3.5 Subgrade preparation
- 3.6 Foundation assembly
- 3.7 Setting foundations
- 3.8 Backfill
- 3.9 Site restoration
- 3.10 Installation problems
- 4.1 Introduction
- 4.2 Construction—Dry-hole method
- 4.3 Construction—Wet-hole method
- 4.4 Excavation—Rock
- 4.5 Direct embedment
- 4.6 Noncircular shaft
- 4.7 Hollow shaft
- 4.8 Installation problems—Geotechnical
- 4.9 Installation problems—Construction