IEEE Standard for Pole Line Hardware for Overhead Line Construction
Introduction: This introduction is not part of IEEE Std C135.90-2014, IEEE Standard for Pole Line Hardware for Overhead Line Construction. This standard combines the following standards for wood pole line hardware for overhead line construction: ANSI C135.22, ANSI Standard for Zinc-Coated Ferrous Pole-Top Insulator Pins with Threads for Overhead Line Construction.a IEEE PC135.11, Draft Standard for Zinc-coated Ferrous Guy Attachments, Wrap and Formed Guy Hooks, Guy Strain Plates, and Pole Eye Plates for Overhead Line Construction.b IEEE Std C135.2™, IEEE Standard for Threaded Zinc-Coated Ferrous Strand-Eye Anchor Rods and Nuts for Overhead Line Construction.c,d IEEE Std C135.12™, IEEE Standard for Pole Guards. IEEE Std C135.17™, IEEE Standard for Zinc-Coated Ferrous Bolt-Type Insulator Pins with Threads Used with Pin Type Insulators for Overhead Line Construction. IEEE Std C135.33™, IEEE Standard for Galvanized Ferrous Crossarm Gains for Overhead Line Construction. NEMA PH11, NEMA Standards for Galvanized Ferrous Guy Attachments, Wrap and Formed Guy Hooks, Guy Strain Plates and Pole Eye Plates.e NEMA PH23, NEMA Standards for Steel and Malleable Iron Guy Clamps. a ANSI publications are available from the American National Standards Institute (http://www.ansi.org). b This IEEE project was withdrawn in December 2010. c IEEE publications are available from The Institute of Electrical and Electronics Engineers (http://shop.ieee.org/). d The IEEE standards or products referred to in this introdu
Contents:
- 1.1 Scope
- 1.2 Purpose
- 4.1 Anchor rods
- 4.2 Nuts for anchor rods
- 4.3 Threads
- 4.4 Tests for strength
- 4.5 Sizes
- 4.6 Protective coating
- 5.1 Material
- 5.2 Dimensions
- 5.3 Strength
- 5.4 Protective coating
- 6.1 Material
- 6.2 Guy clamp bolts strength
- 6.3 Dimensions
- 6.4 Protective coating
- 7.1 Material
- 7.2 Dimensions
- 7.3 Threads
- 7.4 Strength
- 8.1 Material
- 8.2 Dimensions
- 8.3 Protective coating
- 9.1 Material
- 9.2 Dimensions
- 9.3 Protective coating
- 10.1 Galvanizing
- 10.2 Other coatings