IEEE C37.100.2-2018 PDF

IEEE C37.100.2-2018 PDF

IEEE Standard for Common Requirements for Testing of AC Capacitive Current Switching Devices over 1000 V

$36.00 $72.00 -50%
isbn 9781504448642
Product Code: IEEE C37.100.2
Stock In Stock
Published: 05/18/2018
Number of Pages: 29
File Size: 1 file, 2.7 MB

Available Options

Product Description

IEEE Standard for Common Requirements for Testing of AC Capacitive Current Switching Devices over 1000 V

Introduction: This introduction is not part of IEEE Std C37.100.2-2018, IEEE Standard for Common Requirements for Testing of AC Capacitive Current Switching Devices over 1000 V. The scope of this document is limited to testing switching devices for capacitive current switching capability only. For other testing requirements, refer to the relevant apparatus standards. This capacitive current switching test standard is a document combining the requirements of IEEE Std C37.09a™-2005 [B7] with IEEE Std C37.66™-2005 [B11] and IEEE Std 1247™-2005 [B3]. IEEE Std C37.09a-2005 was selected as the base document because it had been harmonized by a joint IEEE/IEC task force that developed a revised approach to capacitive current switching standardization. IEC has published this task force’s work as part of IEC’s circuit breaker standard, designated IEC 62271-100. Please note that since IEEE Std C37.016™-2006 [B9] refers to IEEE Std 1247-2005 [B3] for all of the capacitive current switching tests it specifies, consideration of IEEE Std 1247-2005 [B3] covers the requirements of IEEE Std C37.016-2006 [B9]. The term circuit-breaker from IEEE Std C37.09a [B7] has been replaced with the term capacitive current switching device for this document. These standards represent two basic methods for determining capacitive current switching performance. The method to prove performance per IEEE Std C37.09a [B7] is based on focusing on the performance at minimum arcing time and then demonstrating the rest of the inte

Contents:

  • 1.1 Scope
  • 1.2 Usage of terms
  • 3.1 Definitions
  • 3.2 Acronyms and abbreviations
  • 4.1 General
  • 4.2 Ratings and applicability
  • 4.3 Switching rating information
  • 4.4 Characteristics of the capacitive circuit to be switched
  • 4.5 Characteristics of supply circuits
  • 4.6 Test current
  • 4.7 Preconditioning for devices rated for fault current interrupting—Class C2
  • 4.8 Test programs for time-controllable devices
  • 4.9 Test procedures for random switching
  • 4.10 Common criteria to pass capacitive switching tests
  • 4.11 Frequency considerations
  • 4.12 Harmonization with IEC

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE C37.100.2-2018 PDF

IEEE C37.100.2-2018 PDF

$36.00 $72.00