IEEE C50.13-2014 PDF

IEEE C50.13-2014 PDF

IEEE Standard for Cylindrical-Rotor 50 Hz and 60 Hz Synchronous Generators Rated 10 MVA and Above

$59.50 $119.00 -50%
isbn 9780738190686
Product Code: IEEE C50.13
Stock In Stock
Published: 05/09/2014
Number of Pages: 61
File Size: 1 file, 1.2 MB

Available Options

Product Description

IEEE Standard for Cylindrical-Rotor 50 Hz and 60 Hz Synchronous Generators Rated 10 MVA and Above

Introduction: This introduction is not part of IEEE Std C50.13™-2014, IEEE Standard for Cylindrical-Rotor 50 Hz and 60 Hz Synchronous Generators Rated 10 MVA and Above. This introduction provides some background on the rationale used to develop this standard. This information is meant to aid in the understanding and usage of this standard. From the early 1990s until the date of issue of this standard, three different working groups of the Electrical Machinery Committee (EMC) of the IEEE Power Engineering Society have carefully pursued the modernization of the ANSI C50 standards for large steam and combustion turbine-generators. Throughout the mid-1990s the first working group (IEEE PES EMC Task Force on Standards Harmonization) compared American National Standards Institute (ANSI) standards for several different types of electrical machines with corresponding International Electrotechnical Commission (IEC) standards. In the late 1990s members of the EMC Task Force published several summaries of their work (Bartheld [B1]; Gott [B5]; Kaminski [B16]; Nippes [B20]; Woods [B21]).a In association with that general initiative by the Electric Machinery Committee (EMC) to compare different standards for electric machines, the EMC commissioned a second working group in 1998 to focus on clarifying and modernizing the ANSI C50 series of standards for synchronous generators. That working group included the following ANSI C50.1X standards in their scope: a) ANSI C50.10-1990, American National Standard f

Contents:

  • 1.1 Scope
  • 1.2 Purpose
  • 4.1 Service conditions and steady-state duty
  • 4.2 Transient event and emergency duty requirements
  • 4.3 Service environment
  • 5.1 Output rating
  • 5.2 Capabilities
  • 5.3 Voltage and current ratings
  • 5.4 Power factor and reactive power capability
  • 5.5 Short-circuit ratio
  • 5.6 Transient and subtransient reactances
  • 5.7 Total harmonic distortion
  • 6.1 Insulation systems defined
  • 6.2 Classes of insulation systems
  • 6.3 The use of different classes of insulation systems
  • 7.1 Temperature limits
  • 7.2 Methods of temperature determination
  • 7.3 Locations of embedded temperature detectors
  • 7.4 Location of coolant temperature detectors
  • 8.1 Methods
  • 8.2 Reference conditions
  • 8.3 Types of losses
  • 8.4 Test tolerance on losses
  • 9.1 Categories and scope of tests
  • 9.2 Test procedural requirements
  • 9.3 Heat exchanger testing
  • 9.4 Testing high-voltage terminal bushings
  • 9.5 Overspeed testing
  • 9.6 Sudden short-circuit testing
  • 10.1 Nameplate

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE C50.13-2014 PDF

IEEE C50.13-2014 PDF

$59.50 $119.00