IEEE Standard for Pole-Mounted Equipment--Enclosure Integrity
Introduction: This introduction is not part of IEEE Std C57.12.31-2020, IEEE Standard for Pole-Mounted Equipment—Enclosure Integrity. The Accredited Standards Committee on Transformers, Regulators, and Reactors, C57, originally developed and correlated standards on these products, together with the Accredited Standards Committee on Power Switchgear, C37, through the Joint ASC C57/C37 Working Group on Enclosures with Joseph Martin and then with Robert C. Olen as chairman. This group is now the Enclosure Integrity Working Group of the IEEE Transformers Committee. The data used in this work have been gathered from many sources, including the standards of the Institute of Electrical and Electronics Engineers and the National Electrical Manufacturers Association, reports of committees of the Edison Electric Institute, and others. In this revision of the guide a Word usage clause was added, additional definitions were added, and a new coating touch up clause and normative reference were added. Further, the purpose of each test was clarified, and the standard was generally updated and clarified.
Contents:
- 1.1 Scope��������������������������������������������������������������������������������������������������������������������������������������������������11
- 1.2 Purpose�����������������������������������������������������������������������������������������������������������������������������������������������11
- 1.3 Word usage�����������������������������������������������������������������������������������������������������������������������������������������11
- 4.1 Enclosure design requirements—Objective���������������������������������������������������������������������������������������13
- 4.2 Substrate requirements�����������������������������������������������������������������������������������������������������������������������14
- 5.1 General�����������������������������������������������������������������������������������������������������������������������������������������������14
- 5.2 Enclosure color�����������������������������������������������������������������������������������������������������������������������������������14
- 5.3 Coating system test specimens�����������������������������������������������������������������������������������������������������������14
- 5.4 Coating system performance requirements����������������������������������������������������������������������������������������17
- 6.1 Shipment��������������������������������������������������������������������������������������������������������������������������������������������19
- 6.2 Coating repair procedure��������������������������������������������������������������������������������������������������������������������19
- 6.3 Coating touch-up prior to shipment����������������������������������������������������������������������������������������������������19