IEEE C57.13.5-2019 PDF

IEEE C57.13.5-2019 PDF

IEEE Standard for Performance and Test Requirements for Instrument Transformers of a Nominal System Voltage of 115 kV and Above

$56.00 $112.00 -50%
isbn 9781504466523
Product Code: IEEE C57.13.5
Stock In Stock
Published: 02/21/2020
File Size: 1 file, 1.7 MB

Available Options

Product Description

IEEE Standard for Performance and Test Requirements for Instrument Transformers of a Nominal System Voltage of 115 kV and Above

Introduction: This introduction is not part of IEEE Std C57.13.5-2019, IEEE Standard for Performance and Test Requirements for Instrument Transformers of a Nominal System Voltage of 115 kV and Above. The mission of C57.13.5™ Test Requirements for Instrument Transformers of a Nominal System Voltage of 115 kV and Above Working Group is to develop a comprehensive set of performance and test requirements for instrument transformers of a nominal system voltage of 115 kV and above. The objective is to improve the performance and safety of the instrument transformers in response to the concern indicated in the publication EPRI Workshop on Failed High Voltage Instrument Transformers, held in September 1990. The first edition was published in 2003. The second edition was published in 2009. The main changes introduced in this revision are: — Update of references — New definitions have been added for gas-filled instrument transformers — Wind speed has been decreased from 160 km/h to 40 m/s (144 km/h) — Partial discharge levels (type test vs routine test) have been combined in a single table — Requirements of for density monitoring for gas-filled instrument transformers have been added — Pressure routine and type tests have been added for enclosures used on gas-filled instrument transformers — Addition of a rated arc proof current — Reference to R10 series has been added for the arc proof current — Additional identification for current transformers having an anti-remanence gap in the magnetic circuit

Contents:

  • 1.1 Scope��������������������������������������������������������������������������������������������������������������������������������������������������11
  • 1.2 Purpose�����������������������������������������������������������������������������������������������������������������������������������������������11
  • 1.3 Word usage�����������������������������������������������������������������������������������������������������������������������������������������11
  • 4.1 Insulation requirements����������������������������������������������������������������������������������������������������������������������14
  • 4.2 Mineral oil requirements��������������������������������������������������������������������������������������������������������������������18
  • 4.3 Requirements for accuracy and accuracy calibration systems������������������������������������������������������������18
  • 4.4 Mechanical performance requirements����������������������������������������������������������������������������������������������18
  • 4.5 Thermal performance requirements����������������������������������������������������������������������������������������������������20
  • 4.6 Ground shield requirements���������������������������������������������������������������������������������������������������������������20
  • 4.7 Dissolved gas and water content requirements for new oil-immersed transformers���������������������������20
  • 4.8 Endurance capability for fast high voltage transient���������������������������������������������������������������������������21
  • 4.9 Performance of internal arc protection�����������������������������������������������������������������������������������������������21
  • 4.10 Identification of test sample in the type test report����������������������������������������������������������������������������21
  • 4.11 Secondary short-circuit capability for voltage transformers�������������������������������������������������������������21
  • 4.12 Relaying current transformers having an anti-remanence gap����������������������������������������������������������22
  • 4.13 Gas filling pressure and gas monitoring for gas-filled instrument transformers��������������������������������22
  • 6.1 Routine tests and test sequences���������������������������������������������������������������������������������������������������������23
  • 6.2 Type tests and test sequences��������������������������������������������������������������������������������������������������������������26
  • 6.3 Special tests����������������������������������������������������������������������������������������������������������������������������������������29
  • 7.1 Verification of terminal markings and polarity�����������������������������������������������������������������������������������29
  • 7.2 Capacitance and dissipation factor test�����������������������������������������������������������������������������������������������29
  • 7.3 Applied voltage test on secondary windings���������������������������������������������������������������������������������������29
  • 7.4 Insulation resistance test on windings�������������������������������������������������������������������������������������������������30
  • 7.5 Lightning impulse voltage test on the primary winding����������������������������������������������������������������������30
  • 7.6 Power frequency voltage withstand test���������������������������������������������������������������������������������������������31
  • 7.7 Partial discharge test���������������������������������������������������������������������������������������������������������������������������31
  • 7.8 Dissolved gas and water content analysis for oil-immersed transformers (of a nominal system
  • 7.9 Sealing test�����������������������������������������������������������������������������������������������������������������������������������������32
  • 7.10 Ground shield check�������������������������������������������������������������������������������������������������������������������������32
  • 7.11 Tests on the mineral oil���������������������������������������������������������������������������������������������������������������������33

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE C57.13.5-2019 PDF

IEEE C57.13.5-2019 PDF

$56.00 $112.00