IEEE C62.22-2009 PDF

IEEE C62.22-2009 PDF

IEEE Guide for the Application of Metal-Oxide Surge Arresters for Alternating-Current Systems

$93.00 $186.00 -50%
isbn 9780738159362
Product Code: IEEE C62.22
Stock In Stock
Published: 07/03/2009
Number of Pages: 142
File Size: 1 file, 2.8 MB

Available Options

Product Description

IEEE Guide for the Application of Metal-Oxide Surge Arresters for Alternating-Current Systems

Introduction: This introduction is not part of IEEE Std C62.22-2009, IEEE Guide for the Application of Metal-Oxide Surge Arresters for Alternating-Current Systems. Abnormally high voltages can occur on power systems from a variety of origins, including lightning and switching. These overvoltages can cause insulation breakdown, resulting in equipment failure and interrupting the continuity of electric supply to users. Proper coordination of surge-protective devices with the insulation strength of the protected equipment is essential to protect the reliability of power systems and equipment. Metal-oxide surge arresters are the predominately used overvoltage protective device on ac power systems. The application of surge protection devices and their coordination with equipment insulation strengths is a broad and complex subject for which the industry has accumulated a large body of knowledge, experience, and practices. This document provides a concise guide to the application of metal-oxide surge arresters to protect power systems and equipment operating at a nominal voltage of 1000 V and greater. This application guide does not cover the application of low-voltage surge protective devices below 1000 V alternating current (ac). However, it references these devices when applied to the secondary of a transformer because they are part of the transformer protection. Step-by-step directions toward proper solutions for various applications are provided. In many cases, the prescribed steps are adequ

Contents:

  • 3.1 Definitions
  • 3.2 Acronyms and abbreviations
  • 4.1 Overvoltages
  • 4.2 Metal-oxide arresters
  • 4.3 Protective levels
  • 4.4 Insulation withstand
  • 4.5 Separation effects
  • 4.6 Insulation coordination
  • 5.1 Introduction
  • 5.2 Transformer protection, step-by-step procedures
  • 5.3 Special considerations for protection of transformers
  • 5.4 Protection of dry-type insulation
  • 5.5 Special considerations for shunt capacitor bank applications
  • 5.6 Protection of underground transmission cables
  • 5.7 Protection of gas-insulated substations (GIS)
  • 5.8 Protection of high-power static devices and systems
  • 5.9 Protection of series capacitor banks
  • 5.10 Protection of circuit breakers
  • 6.1 Introduction
  • 6.2 General procedure
  • 6.3 Selection of arrester ratings
  • 6.4 Distribution system overvoltages
  • 6.5 Insulation coordination
  • 6.6 Arrester connections
  • 6.7 Special applications
  • 6.8 Isolation
  • 7.1 General considerations
  • 7.2 Transmission-line protection
  • 7.3 Distribution line protection
  • 8.1 Insulation withstand tests

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE C62.22-2009 PDF

IEEE C62.22-2009 PDF

$93.00 $186.00