IEEE C95.1-2345-2014 PDF

IEEE C95.1-2345-2014 PDF

IEEE Standard for Military Workplaces--Force Health Protection Regarding Personnel Exposure to Electric, Magnetic, and Electromagnetic Fields, 0 Hz to 300 GHz

$53.50 $107.00 -50%
isbn 9780738189826
Product Code: IEEE C95.1-2345
Stock In Stock
Published: 05/30/2014
Number of Pages: 69
File Size: 1 file, 1.9 MB

Available Options

Product Description

IEEE Standard for Military Workplaces--Force Health Protection Regarding Personnel Exposure to Electric, Magnetic, and Electromagnetic Fields, 0 Hz to 300 GHz

Introduction: This introduction is not part of IEEE Std C95.1-2345™-2014, IEEE Standard for Military Workplaces—Force Health Protection Regarding Personnel Exposure to Electric, Magnetic, and Electromagnetic Fields, 0 Hz to 300 GHz. In 1960, the American Standards Association approved the initiation of the Radiation Hazards Standards project under the co-sponsorship of the Department of the Navy and the Institute of Electrical and Electronics Engineers, Incorporated (IEEE). Prior to 1988, C95 standards were developed by Accredited Standards Committee C95, and submitted to the American National Standards Institute (ANSI) for approval and issuance as ANSI C95 standards. Between 1988 and 1990, the committee was converted to Standards Coordinating Committee 28 (SCC 28) under the sponsorship of the IEEE Standards Board. In 2001, the IEEE Standards Association Standards Board approved the name “International Committee on Electromagnetic Safety (ICES)” for SCC 28 to better reflect the scope of the committee and its international membership. In accordance with policies of IEEE, C95 standards are issued and developed as IEEE standards and submitted to ANSI for recognition. In June 1995, the IEEE Standards Board approved the establishment of Standards Coordinating Committee 34 (SCC34), Product Performance Standards Relative to the Safe Use of Electromagnetic Energy. Standards developed by SCC34 do not specify limits for human exposure to electromagnetic fields, but refer to established limits found

Contents:

  • 1.1 Scope
  • 1.2 Purpose
  • 1.3 Introduction
  • 3.1 Definitions
  • 3.2 Acronyms and abbreviations
  • 3.3 Frequency bands
  • 3.4 Letter symbols for quantities
  • 3.5 Unit symbols
  • 4.1 Dosimetric reference limits (DRLs) and exposure reference levels (ERLs) for frequencies
  • 4.2 DRLs for frequencies between 100 kHz and 3 GHz
  • 4.3 ERLs for contact current, induced current, and contact voltage: f = 100 kHz to 110 MHz
  • 4.4 DRLs for frequencies between 3 GHz and 300 GHz
  • 4.5 ERLs for frequencies between 100 kHz and 300 GHz
  • 4.6 Spatial peak power density ERLs for localized exposure
  • 4.7 Assessing compliance with this standard

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE C95.1-2345-2014 PDF

IEEE C95.1-2345-2014 PDF

$53.50 $107.00