Standard Reference Temperature for Industrial Length Measurements
Introduction: This document is a geometrical product specification (GPS) standard and is to be regarded as a fundamental GPS standard (see ISO 14638). More detailed information on the relation of this document to other standards and the GPS matrix model can be found in Annex C. The definitions of the units, including those of length and temperature, are adopted by the General Conference of Weights and Measures (CGPM) under the authority of the Convention of the Metre. These definitions are maintained in the SI brochure[4]. The unit of length, the metre, is independent of temperature. The current definition of the metre is based on the distance light travels in a vacuum during a unit of time. However, a physical object is subject to thermal expansion and, consequently, its geometrical and dimensional properties are dependent on its temperature. Specifying a reference temperature allows the geometrical and dimensional properties of a physical object to be unambiguously stated. © ISO 2022 – All rights reserved
Scope: This document defines the concepts of a reference temperature and the standard reference temperature and specifies the standard reference temperature value for the specification of geometrical and dimensional properties of an object. Some examples of geometrical and dimensional properties include size, location, orientation (including angle), form and surface texture of a workpiece. This document is also applicable to the definition of the measurand used in verification or calibration.