ISO 10052-2021 PDF

ISO 10052-2021 PDF

Acoustics-Field measurements of airborne and impact sound insulation and of service equipment sound-Survey method

$60.00 $120.00 -50%
Product Code: ISO 10052
Stock In Stock
Edition: 2ND
Published: 07/2021
Number of Pages: 40
File Size: 1 file, 2 Bytes

Available Options

Product Description

Acoustique - Mesurages in situ de l'isolement aux bruits aériens et de la transmission des bruits de choc ainsi que du bruit des équipements - Méthode de contrôle

Introduction: This document describes survey field test methods which can be used for surveying the acoustic characteristics of the airborne sound insulation, impact sound insulation and of the sound pressure levels from service equipment. The methods may be used for screening tests of the acoustical properties of buildings. The methods are not intended to be applied for measuring acoustical properties of building elements. The approach of the survey methods is to simplify the measurement of sound pressure levels in rooms by using a hand-held sound level instrument and by manually sweeping the microphone in the room space. The correction for reverberation time can be either estimated by usage of tabular values or be based on measurements. The measurement of airborne and impact sound insulation is carried out in octave bands. For measuring sound from domestic service equipment, A - or C -weighted sound pressure levels are recorded. Measurements are performed with specified operation conditions and operation cycles. The operating conditions and operating cycles given in Annex B are only used if they are not opposed to national requirements and regulations. The measurement uncertainty of the results obtained using the survey method is a priori larger than the uncertainty inherent in the corresponding test methods on engineering level. NOTE Engineering methods for field measurements of airborne and impact sound insulation are dealt with in ISO 16283-1 and ISO 16283-2. Engineering methods for f

Scope: This document specifies field survey methods for measuring a) airborne sound insulation between rooms, b) impact sound insulation of floors, c) airborne sound insulation of façades, and d) sound pressure levels in rooms caused by service equipment. The methods described in this document are applicable for measurements in rooms of dwellings or in rooms of comparable size with a maximum of 150 m3. For airborne sound insulation, impact sound insulation and façade sound insulation the method gives values which are (octave band) frequency dependent. They can be converted into a single number characterising the acoustical performances by application of ISO 717-1 and ISO 717-2. For heavy/soft impact sound insulation, the results also are given as A-weighted maximum impact sound pressure level. For service equipment sound the results are given directly in A - or C -weighted sound pressure levels.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 10052-2021 PDF

ISO 10052-2021 PDF

$60.00 $120.00