ISO 10094-1-2021 PDF

ISO 10094-1-2021 PDF

Pneumatic fluid power-Electro-pneumatic pressure control valves-Part 1: Main characteristics to include in the supplier's literature

$60.00 $120.00 -50%
Product Code: ISO 10094-1
Stock In Stock
Edition: 2ND
Published: 11/2021
Number of Pages: 22
File Size: 1 file, 2 Bytes

Available Options

Product Description

Transmissions pneumatiques — Appareils électropneumatiques de distribution à commande continue de pression — Partie 1: Principales caractéristiques à inclure dans la documentation des fournisseurs

Introduction: In pneumatic fluid power systems, power is transmitted and controlled through a gas under pressure within a circuit. When pressure tracking or pressure regulation is required, electro-pneumatic continuous pressure control valves can be used to track a variable set point with low tracking error or to maintain the pressure of the gas at an approximately constant level. These control valves continuously modulate the pneumatic pressure of a system in response to a continuous electrical input signal and link the electrical input value to a proportional pressure value. It is therefore necessary to know some performance characteristics of these electro-pneumatic continuous pressure control valves in order to determine their suitability. ISO 10094-1:2021(E) © ISO 2021 – All rights reserved

Scope: This document specifies which characteristics of electro-pneumatic continuous pressure control valves are to be included in the supplier's literature. In accordance with ISO 5598, these control valves include: — electrically modulated pneumatic proportional pressure valves, — proportional pressure control valves without electronic pressure feedback, and — proportional pressure control valves with electronic pressure feedback. This document is limited to the characterization of components with an exhaust port to the atmosphere. NOTE 1 The characteristics of non-electrically modulated pneumatic pressure control valves are specified in ISO 6953-1. NOTE 2 The characteristics of electro-pneumatic continuous flow control valves are specified in ISO 10041-1.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 10094-1-2021 PDF

ISO 10094-1-2021 PDF

$60.00 $120.00