ISO 10109-2024 PDF

ISO 10109-2024 PDF

Optics and photonics-Guidance for the selection of environmental tests

$96.50 $193.00 -50%
Product Code: ISO 10109
Stock In Stock
Edition: 3.
Published: 02/2024
Number of Pages: 30
File Size: 1 file, 1 Byte

Available Options

Product Description

Optics and photonics — Guidance for the selection of environmental tests

Introduction: Optical and photonic instruments including additional assemblies from other fields (e.g. mechanical, chemical, and electronic devices) are affected during their use by a number of different environmental and handling parameters, which they are required to resist without significant reduction in performance and to remain within defined specifications. This is what the manufacturer attempts to ensure and the user expects to receive. This expectation can be assessed by exposure of the instrument to a range of simulated environmental parameters under controlled laboratory conditions. The cumulative combination, degree of severity, and sequence of these conditions can be selected to obtain meaningful results in a relatively short period of time. Technical requirements as given in the tables of this document are abbreviated and the reader has to consult the referenced standards (i.e. the relevant part of ISO 9022) for the full specification of the technical requirement. For the purposes of this document, nominal values for properties or performance characteristics are understood to be the manufacturer's internal technical data and do not directly reflect manufacturer's product specifications. © ISO 2024 – All rights reserved

Scope: This document contains tables for environmental tests and test parameters which can be used as a guideline for the selection of environmental tests. These include the selection of standardized tests according to ISO 9022 as well as additional parameters not described in ISO 9022 and necessary for the optical or photonic instruments. Ultimately, these tables specify the requirements to be met with regard to the reliability of the optical, mechanical, chemical, and electrical properties or performance characteristics of the instruments when exposed to environmental influences. Environmental test methods, as specified in ISO 9022 (all parts), can be assigned to the various areas of application for the purpose of ascertaining the suitability of the instruments in the respective area of application.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 10109-2024 PDF

ISO 10109-2024 PDF

$96.50 $193.00