ISO 10312-2019 PDF

ISO 10312-2019 PDF

Ambient air-Determination of asbestos fibres-Direct transfer transmission electron microscopy method

$60.00 $120.00 -50%
Product Code: ISO 10312
Stock In Stock
Edition: 2ND
Published: 10/2019
Number of Pages: 80
File Size: 1 file, 7 Bytes

Available Options

Product Description

Ambient Air - Determination of Asbestos Fibres - Direct-Transfer Transmission Electron Microscopy Method

Introduction: This document is applicable to the determination of airborne asbestos in a wide range of ambient air situations, including the interior atmospheres of buildings, and for a detailed evaluation of any atmosphere. Because the best available medical evidence indicates that the numerical fibre concentration and the fibre sizes are the relevant parameters for evaluation of the inhalation hazards, a fibre counting technique is the only logical approach. Most fibres in ambient atmospheres are not asbestos and therefore, there is a requirement for fibres to be identified. Many airborne asbestos fibres in ambient atmospheres have diameters below the resolution limit of the optical microscope. This document is based on transmission electron microscopy, which has adequate resolution to allow detection of small fibres and is currently the only technique capable of unequivocal identification of the majority of individual fibres of asbestos. Airborne asbestos is often found as a mixture of single fibres and more complex, aggregated structures which may or may not be also aggregated with other particles. The fibres found suspended in an ambient atmosphere can often be identified unequivocally, if a sufficient measurement effort is expended. However, if each fibre were to be identified in this way, the analysis would become prohibitively expensive. Because of instrumental deficiencies or because of the nature of the particulate, some fibres cannot be positively identified as asbestos, even th

Scope: This document specifies a reference method using transmission electron microscopy for the determination of airborne asbestos fibres and structures in in a wide range of ambient air situations, including the interior atmospheres of buildings, and for a detailed evaluation for asbestos structures in any atmosphere. The method allows determination of the type(s) of asbestos fibres present and also includes measurement of the lengths, widths and aspect ratios of the asbestos structures. The method cannot discriminate between individual fibres of asbestos and elongate fragments (cleavage fragments and acicular particles) from non-asbestos analogues of the same amphibole mineral[13].

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 10312-2019 PDF

ISO 10312-2019 PDF

$60.00 $120.00