ISO 10360-12-2016 PDF

ISO 10360-12-2016 PDF

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 12: Articulated arm coordinate measurement machines (CMM)

$129.00 $258.00 -50%
Product Code: ISO 10360-12
Stock In Stock
Edition: 1ST
Published: 10/01/2016
Number of Pages: 48
File Size: 1 file, 2 Bytes

Available Options

Product Description

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 12: Articulated arm coordinate measurement machines (CMM)

Introduction: This part of ISO 10360 is a general GPS standard (see ISO 14638). For more detailed information about the relation of this part of ISO 10360 to other standards and the GPS matrix model, see Annex I. This part of ISO 10360 is included in the ISO/GPS Masterplan given in ISO 14638, which gives an overview of the ISO/GPS system. The fundamental rules of ISO/GPS given in ISO 8015 apply to this part of ISO 10360 and the default decision rules given in ISO 14253-1 apply to specifications made in accordance with this part of ISO 10360, unless otherwise indicated. The objective of this part of ISO 10360 is to provide a well-defined testing procedure to — enable manufacturers of articulated arm CMMs to provide specification MPEs, and — enable users to test articulated arm CMMs to manufacturer specifications using calibrated traceable reference artefacts. The benefits of these tests are that the measured result has a direct traceability to the unit length, the metre, and that they give information on how the articulated arm CMM will perform on similar length measurements. © ISO 2016 – All rights reserved

Scope: This part of ISO 10360 specifies the acceptance tests for verifying the performance of an articulated arm CMM by measuring calibrated test lengths as stated by the manufacturer. It also specifies the reverification tests that enable the user to periodically reverify the performance of the articulated arm CMM. It applies to articulated arm CMMs using tactile probes and optionally optical distance sensors (also referred to as laser line scanners or laser line probes). Details on tests for scanner accessories are given in Annex E. This part of ISO 10360 does not specify how often or when testing is performed, if at all, nor does it specify which party should bear the cost of testing. This part of ISO 10360 specifies — performance requirements that can be assigned by the manufacturer or the user of the articulated arm CMM, — the manner of execution of the acceptance and reverification tests to demonstrate the stated requirements, — rules for proving conformance, and — applications for which the acceptance and reverification tests can be used.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 10360-12-2016 PDF

ISO 10360-12-2016 PDF

$129.00 $258.00