Petroleum and natural gas industries — Cements and materials for well cementing — Part 3: Testing of deepwater well cement formulations
Introduction: The test methods contained in this document, though generally based on ISO 10426-2, consider the specialized sampling/testing requirements and unique downhole temperature profiles found in deepwater wells. ISO 10426-2 contains no applicable well simulation schedules for deepwater cementing operations. In a deepwater cementing environment, several factors impact the thermal history of the cement slurry. These factors include: water depth, mud-line temperature, geothermal gradient, the presence or absence of a drilling riser, drilling fluid temperature, ocean current velocity, presence of thermoclines (layers of ocean water separated by temperature), ambient sea-surface temperature, cement mix-water temperature, bulk cement temperature, cement mixing rate, cement heat of hydration, displacement rate, prior circulating and static event history, drill pipe size and mass, casing size and mass, and hole size. In this way, the testing of the cement formulation can reflect as closely as possible the actual temperature profile found during field cementing operations. Numerical modelling can be used to determine the relative magnitude of the input variables so that “most likely” and “less likely” scenarios of temperature history can be assessed. The values of some input variables might not be known precisely, and a range of possible values needs to be employed. Physical laboratory testing can then be conducted at “most likely” conditions, with some additional testing at “less likely” c
Scope: This document provides procedures for testing well cements and cement blends for use in the petroleum and natural gas industries in a deepwater environment, or areas with a low seafloor temperature, or areas where low well temperatures exist. This document supplements API RP 10B-3, 2nd edition (2016), the requirements of which are applicable with the exceptions specified in this document. This document excludes the mitigation of shallow water flow in deepwater wells. NOTE This is addressed in API RP 65.