Railway applications — Vehicle reference masses
Introduction: This document provides a set of vehicle reference masses and describes how each is derived. These reference masses can be used as a clear and unique specification of the load conditions of rail vehicles in relation to dimensioning, design, testing, acceptance, marking, delivery, operation, maintenance, etc. This document does not specify for which cases a defined reference mass is applied. The determination of how these reference masses are applied is governed by the corresponding application standards or specifications. The reference masses are determined from the parameters described in the document (see 5.1), and their default values. If the default values are not applicable for certain vehicles, specific reference masses may, where justified, be chosen from a range of values given in brackets. The corresponding vehicle specification identifies where specific values are used instead of default values. In this sense, the reference masses, whether based on default values or on specific values, are consistent for all applications which use them. This document does not supersede mass definitions in application standards. As such, application standards can provide their own mass definitions (special purpose masses). To align these mass definitions in application standards, such special purpose mass definitions should stay within the framework of the specifications described in this document. © ISO 2025 – All rights reserved
Scope: This document provides reference masses for specifying the requirements for rail vehicles. These reference masses are specified with respect to the whole vehicle, but they can also be applicable to a specific system or component. This document does not supersede mass or payload conditions which are specified in application standards. This document is applicable for all types of rail vehicles.