ISO 1071-2015 PDF

ISO 1071-2015 PDF

Welding consumables - Coveredelectrodes, wires, rods and tubularcored electrodes for fusion welding ofcast iron - Classification

$60.00 $120.00 -50%
Product Code: ISO 1071
Stock In Stock
Edition: 3RD
Published: 11/15/2015
Number of Pages: 22
File Size: 1 file, 308 Bytes

Available Options

Product Description

Covered Electrodes for Manual Arc Welding of Cast Iron - Symbolization

Introduction: This International Standard classifies welding consumables for fusion welding of various types of unalloyed cast irons. Applications for welding consumables classified to this International Standard: — production welding, that means welding of cast materials during the process of production. In that way, the quality of the casting shall be ensured in accordance with the guaranteed properties and to the requirements of the application; — repair welding of castings which are damaged during service; — welding for construction purposes where cast irons are joined to themselves or to other ferrous or non-ferrous metals. The following methods are used for the welding of cast irons: — using a welding consumable which produces a weld metal similar to the parent metal. High preheating is required (typical temperature range 550 °C to 650 °C); — using a welding consumable which produces a weld metal dissimilar to the parent metal. No or only low preheating is required. This International Standard contains different types of welding consumables because the chemical composition of welding rods and wire electrodes, as well as the all-weld metal of the corresponding covered electrodes and tubular cored electrodes, is similar. Additionally, to the welding consumables specified in this International Standard, consumables classified to other standards can be used (see Annex A). © ISO 2015 – All rights reserved

Scope: This International Standard specifies requirements for classification of covered electrodes for manual metal arc welding, wire electrodes for metal arc welding, tubular cored electrodes for metal arc welding with and without a gas shield, rods for TIG-welding, and rods for oxy-fuel gas welding of unalloyed cast irons. Classification is based on the chemical composition of wires and rods and on the all-weld metal deposit for tubular cored and covered electrodes.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 1071-2015 PDF

ISO 1071-2015 PDF

$60.00 $120.00