ISO 10767-3-2025 PDF

ISO 10767-3-2025 PDF

Hydraulic fluid power-Determination of pressure ripple levels generated in systems and components-Part 3: Method for motors

$129.00 $258.00 -50%
Product Code: ISO 10767-3
Stock In Stock
Edition: 2.
Published: 05/2025
Number of Pages: 46
File Size: 1 file, 2 Bytes

Available Options

Product Description

Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 3: Method for motors

Introduction: In hydraulic fluid power systems, power is transmitted and controlled through a liquid under pressure within an enclosed circuit. Positive displacement motors are components that convert hydraulic fluid power into rotary mechanical power. During the process of converting hydraulic power into rotary power, flow and pressure ripple and structure-borne vibrations are generated. The pressure ripple and the structure-borne vibrations, which are generated by the unsteady flow drawn in by the motor are transmitted through the system at levels depending upon the characteristics of the motor and the circuit. Thus, the determination of the pressure ripple generated by a motor is complicated by the interaction between the motor and the circuit. The method adopted to measure the pressure ripple levels of a motor should, therefore, be such as to eliminate this interaction. The measurement technique described in this document isolates the motor flow ripple and pressure ripple from the effects of such circuit interactions, by mathematical processing of pressure ripple measurements (see References [4] to [11]). A figure of merit is obtained which allows motors of different types and manufacturer to be compared as pressure ripple generators. This enables the motor designer to evaluate the effect of design modifications on the pressure ripple levels produced by the motor in service. It also enables the hydraulic system designer to avoid selecting motors having high pressure ripple levels. Resu

Scope: This document specifies a procedure for the determination of a rating of the source flow ripple, source impedance and pressure ripple levels generated by positive-displacement hydraulic motors, including bidirectional motors. This document is applicable to all types of positive-displacement motor operating under steady-state conditions, irrespective of size, for frequencies from 50 Hz to 3 500 Hz. It is applicable for the inlet port of positive-displacement motors.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 10767-3-2025 PDF

ISO 10767-3-2025 PDF

$129.00 $258.00