ISO 10771-1-2015 PDF

ISO 10771-1-2015 PDF

Hydraulic fluid power - Fatigue pressure testing of metal pressure-containing envelopes - Part 1: Test method

$60.00 $120.00 -50%
Product Code: ISO 10771-1
Stock In Stock
Edition: 2ND
Published: 08/01/2015
Number of Pages: 22
File Size: 1 file, 350 Bytes

Available Options

Product Description

Transmissions hydrauliques - Essais de fatigue des enveloppes métalliques sous pression - Partie 1: Méthode d’essai

Introduction: In hydraulic fluid power systems, power is transmitted and controlled under pressure within an enclosed circuit. It is important for the manufacturer and user of hydraulic components to have information on their global reliability because of the importance of the fatigue failure mode and the relationship this has with the functional safety and service life of such components. This part of ISO 10771 provides a method for fatigue testing the pressure-containing envelope provided by hydraulic components. During operation, components in a system can be subjected to loads that arise from the following: — internal pressure; — external forces; — inertia and gravitational effects; — impact or shock; — temperature changes or gradients. The nature of these loads can vary from a single static application to continuously varying amplitudes, repetitive loadings, and even shocks. It is important to know how a component can withstand these loads, but this part of ISO 10771 addresses only the loading due to internal pressure. There are many ways in which internal pressure loads are imposed upon a component. This part of ISO 10771 considers a broad range of waveforms within prescribed time limits, temperatures, and environmental conditions, and only upon metals. It is expected that these limitations could still provide sufficient common ground for a method of fatigue pressure testing metal pressure-containing envelopes in hydraulic fluid power components. This method, therefore, provides the

Scope: This part of ISO 10771 specifies a method of fatigue testing the pressure-containing envelopes of components used in hydraulic fluid power systems under sustained steady cyclic internal pressure loads. This part of ISO 10771 is only applicable to component pressure-containing envelopes that — are manufactured from metals, — are operated at temperatures that exclude creep and low-temperature embrittlement, — are only subjected to pressure-induced stresses, — are not subjected to loss of strength due to corrosion or other chemical action, and — might include gaskets, seals, and other non-metallic components; however, these are not considered part of the pressure-containing envelope being tested (see 5.7). This part of ISO 10771 does not apply to piping as defined in ISO 4413 (i.e. connectors, hose, tubing, pipe). See ISO 6803 and ISO 6605 for methods of fatigue testing of piping devices. This part of ISO 10771 establishes a general test method that is applicable for many hydraulic fluid power components, but additional requirements or more specific methods that can be required for particular components are contained in the annexes or other standards. Test pressure is to be determined by the user. See ISO/TR 10771-2 for a possible rating method.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 10771-1-2015 PDF

ISO 10771-1-2015 PDF

$60.00 $120.00